john deere f1145

I have two JD F1145 mowers one starts right away and the other acts like it is going to start right away but then have to crank it about another 5 to 10 seconds before it starts and then it emits black smoke when it first starts ( I always wait for the intake heater to cycle ) but it runs good...

I have 2 JD F1145's both have 72 inch decks one deck is still cuts ok the other one has had a bunch of repairs and has about done , my question is what other decks could I use to replace it with either 60 inch or 72 inch ? I just tried to use a 60 inch deck from a F911 but the gear boxes on them...

Hey guys! I was wondering if anyone has a book or know where I can get a book for the 3 cylinder Yanmar from a JD F1145? Im getting the engine from one and would like to rebuild it. I found the spec sheet for the tractor but not the engine. Any info would be great! Thanks!

Hi, just joined the site, have lurked here some. I have a John Deere F1145 that has been sitting(inside barn) for 5+ years. Trying to get it going, it has the Yanmar 3 cylinder diesel in it. Put new battery in, some fresh fuel in one tank, and pumped the manual prime lever on the fuel pump. A...

I recently purchased a used F1145 in great condition; one owner, residential use, stored inside, well maintained, 1340 hours. This is my first F1145. I also have a F935 and 855 CUT. The F1145 is an early model based on the serial number. The engine in this model is the 3TN75, as opposed to the...

Just wondering if anyone still runs John Deere F935 or F1145 front mowers here. I have an F1145 and it sure is an awesome machine. Mine is an 1999 model with 1700 hours.

My John Deere F1145 is giving me a fit right now. It has a 3 cylinder Yanmar diesel engine and wasnt giving me any problems until i decided to change the fuel filter. The problem is i changed the fuel filter and bled fuel system according to the manual and it started right up. After driving for...

Hi, I'm a new member and had some questions about an F1145. I just purchased it used and it seems to be in good mechanical order. I want to do some servicing on it and am curious of what components I should service. I'll change the oil and filter, grease the chassis, change the fuel filter...