john deere x534

whats the procedure for wheel alignment on a john deere x534 a 4-wheel steering garden tractor

I have a 2006 x534 purchased used. Changed the transmission fluid for the first time yesterday. Manual says it takes 5.6 quarts. I put in 4 quarts. Ran the machine for 5 minutes as described in the manual. When I checked the fluid level it was way past the Full Mark, almost to the top of the...

I have a 2013 x534 with about 150 hours on it, and I am experiencing an issue with the rear steering. If I try to back up, the rear left wheel turns all the way in one direction and hits the frame. If I drive forward across a slope, the wheel will automatically point down hill. If it is parked...

Looking to buy a used John Deere 47" snowblower that fits the X530, X534, X540 and X590. This is a belt driven unit. Call Dave at 401-369-0720 or reply to this ad. Thanks.

I dropped a 3" by 3/8" metal pin accidentally into the transmission of my 1-year old John Deere X534 while checking the level. :mad: Now I'm faced with dropping the pan to retrieve the piece. How hard is this to do? I obviously have to drain the oil from both front and back, and most likely...

I'm looking at getting a jd tractor that can rototill / blow snow within the next two years. Is the cornering / steering that much of a difference between the x500 and the x534?

I did notice a few X500 series tractors front grills stayed the same for 2014? I have a brush guard on my X360, will it fit the X534?

I tried posting this in the buying forum with no success and thought it might be more appropriate here. After 8 years of use wear and tear my seat for my 2305 is beginning to look a little ratty. I have tried to use yellow duct tape but this does not seem to work well. I recently bought my...

Hello All, After about 8 years of ownership and subsequent use my tractor seat is starting to look a little ratty and I was thinking of replacing it with a new one. I did get my father a nice high back seat with armrests for his JD 1023 and we placed his old seat on mine and it fit. My dealer...

Going to look at an X534 later this week with 430 hours on in, 2008 model, for $ 3900.00 by private individual. Used to mow a large 2.5 acre flat lot, no towing or ground engaging attachements used. Hood is cracked. The owner moved into the city and doesnt need it anymore. Comments on those...

I have 2 acres of which about 1.5 acres needs to be cut and the rest is wooded My back yard has a significant slope and then levels of at the bottom. I like the John Deere and have settled on the X500 series for now. Later, I will move up to the x700 series. Presently, I have a X300 which is...

I will start off by saying thanks for the forum. I have read many posts and deceided on a x534. I am now in the second stage and that is buying. My local dealer is more into the larger implements vs. the lawn tractors, thus everything is at MSRP and he has no stock. I am looking for dealer...

Yet another "help me buy" post. It seems the John Deere line is one of the better lines, but truthfully I'm not sure I've been able to find a good comparison source or webstie. So, I'm open to suggestions if people think I'm looking at the wrong manufacturer. My yard is 1.5 acres for a home...

Hi all, How much is a clean 2008 x534 with 54 inch deck and 300 hours worth?? The private party seller on craigslist is asking 5400.00 I don't think it's worth that much, but I haven't kept up on used values in a long time. What's your best guess as to true market value? Thanks!

Took delivery of 2011 x534 48" deck. Thrilled with it. Mostly to be used for mowing and towing a cart. However, may want to add a snow blade or snow thrower in the future. Reading owners manual says the rear tires have to be removed and then remove something then reinstall them before installing...

I am new to Lawn Tractors and after hours of research decided a John Deere X534 would be the best for my needs. I will be buying the following items with the tractor: 1) 48 inch blade with tilting accessory; 2) 47 inch snow blower; 3) Grill Cover; 4) Chains; 5) Rear weight bracket; 6) two 42 lbs...

Here's an odd question for you all.... Has anyone ever put the liquid cooled engine from an x540 into an x534?? I did a quick internet search and the x534 engine (FS730V) sells new for about 1500-1700$. The x540 liquid cooled engine (FD731V) Sells for about the same price. What would it take...

Hi all, I'm close to buying an x534 and would like to put a cab on it for winter snow blowing. I've looked at the hard and soft sided cabs for the x700 series and I think they are awesome. Has anyone tried to make one fit on a x500 series? Is their anything close to this cab for a 500 series...

Just picked up a new 2011 X534 last Thursday. I was surprised to see it came with this different seat. I know it's not open back but it appeared to be taller and more comfortable than the seat I've seen on X series machines with the open back so I didn't complain. Does anyone know if they are...

So how would an AWS X534 be with a snowblower. My first guess is this is not a good idea. Any turning with the wheel and the rear tires are pushing in a different direction than forward and it's easier to lose traction. I also see the 534 blower is belt driven and not mechanical or...

Does anyone have any hot tips on where I can pick up a Used JD X534. I am going to negotiate a new one this weekend unless I hear of a nice used one first. Any tips would be greatfully appreciated.

I am looking to purchase my first High dollar Garden Tractor. I am looking at either the Kubota GR 2100 with 21hp Diesel or a JD X534? I found a Kubota Gr2100 with only 60 Hours on it for just under $6000. I like the Glidesteer and the 4 wheel steer of the JD. Has anyone had any experience with...

:confused: First of all - great, but dangerous forum. I haven't received any responses to this on the JD forum, so I figure I'll try this more general forum, as it applies to new vs used purchasing. Thanks to all for adding to my increasing insanity and indecision due to information overload...

First of all - great, but dangerous forum. I started this thread asking about the X300 series, but due to everyone's input, I think I've worked my way up to the X500 series. Thanks to all for adding to my increasing insanity. I've settled on a JD, despite all the various recommendations - I've...

I was looking at John Deere X534 but the only thing holding me back is its 4 wheel steering,I was wondering how do they do on the side of a hill? also do they have any problems with the 4 wheel stering?