kioti ds4510

I have a kioti ds4510 that overheated that causing scars on the cylinders. Trying to locate oversized pistons/rings (87.5mm) any hel point to acquire those parts would be greatly appreciated. Engine model is 4a220lwe and the standard size of pistons are 87mm

I have a Kioti DS4510. It would not start when the clutch was in gaged, I replaced the clutch safety switched and it worked for about two starts now it has the same problem again. Ican use a remote starter switch and it will crank just fine, Any ideas?

After looking at Island Tractors pics of his subframe a couple of weeks ago I got to grips and attempted to get mine made.I constructed it out of 100mm x 50mm box steel for the main frame and 150mm x 10mm for the rear attachment under the pto.I do not have the large receiving plate under the pto...

I'm looking at a used DS4510 with about 1000 hours on it. It has a loader included and a rear remote. It seems like a decent basic, no frills, tractor. Are there any known issues with these or anything to be sure and pay attention to? Also what would a good price on this be? Thank you...

Greetings my fine fellow tractor owners, My first post here...so be gentle :D I currently have an Eastwind Branded Chinese tractor (Dongfeng) - 25Hp, 4:1 bucket and LW6 backhoe. I'm in the process of upgrading to something with more HP so it's easier on the tractor running a rotary hoe. I...

Looking for some input-Bradco states that this set up should work in terms of hydraulic flow and size of tractor, but the hoe seems a bit big for a tractor that only weighs 3500#. Recommended flow is 11-15 GPM, Kioti putting out 13 GPM. Thoughts or advice would help. Also, Bradco does not make...

I am in Vermont and got a quote for a DS4510 Kioti w/FEL for $21400.00. Does this sound fair or should i shop around?