kubota b2100

Was running a couple of weeks ago. Last week, wouldn't start. Replaced glow plugs and installed new battery. Engine turns over fine, but is not firing at all. Seems to be getting fuel. I'm stumped.

I am in need of a Woods 9521 subframe (alternate part # 1020800) to mount a '90s Woods BH6500 backhoe on a '90s Kubota B2100. One dealer says its no longer available, while another dealer said Woods told him they'd MAKE a new one, but it could take months...and $1700. I have been googling and...

I am in need of a Woods 9521 subframe (alternate part # 1020800) to mount a '90s Woods BH6500 on a '90s Kubota B2100. One dealer says its no longer available, while another dealer said Woods told him they'd MAKE a new one, but it could take months...and $1700. I have been googling and calling...

Tractor starts, but immediately stalls when key is released. I have drained fuel and replaced with fresh and have replaced fuel filter. Also have tried running without fuel tank cap in place to rule out vent blockage. Fuel seems to be flowing freely from tank (bowl fills rapidly.) Only thing I...

thinking of buying a kubota have been offered a kubota b2100(with fel power steering hst) also a kubota b8200(with fel no power steering also hst) question is which is the better tractor the b2100 is a fair bit more money ,but is it worth the extra

Hello, Could use some help. I have a B2100 and I am installing a new loader on this tractor. The 2100 has never had a loader on it before and I need to put a hydraulic valve adaptor block on this tractor. Can you guys tell me what block I need, where I can get it and where it mounts and...

Been poking around for a FEL, MMM. Came across a B2100 HST with 60" MMM, FEL and 5' Box blade. 1200 hours. Looks to be in very good condition and is said to have spent its down time indoors. Good tires all around. Seems mechanically sound. They're asking 7900. In our area that's a pretty...

Dear Tractor drivers, I just inherited a Kubota B2100 from my dad. I have single mouldboard plough that i have just used to break some virgin field for a 35 x 5 m garden, that was tight with twitch grass - quite challenging but I got it turned over. also have a 40 inch tiller and a blade along...

Hey Folks.. Curious if anyone has any thoughts they might like to share on a B2100. I saw it today on the side of the road. I am unsure of the year, but they didn't make them for a ton of years anyway... 1250 hrs. Loader, steel cab, hydro trans, loader and 4wd. Condition looked reasonable and...

Hello to all, my name is Chris and I have a B2100 HST Kubota that I am having a few troubles with and could use some assistance. Last year I had replaced the starter on it and shortly afterward it began giving me troubles. First when I turn the key to start the solenoid just clicks. I bump the...

Hi Folks question today is about hard steering on right side only , both turning from center to stop and back to center. left side is fine Kubota b2100 with bispeed not on. what do you think. I only have operators manual at this time. app.750 hrs. Ken

My rear PTO grinds at any engine speed when engaging implements. Any Ideas? Thanks, Matt

Can any one please tell me the size of the rims and tyres that will fit my Kubota B2100D. No one in Newcastle can tell me even the local Kubota dealer.

Can anyone tell me if the belly mower deck that came with the b2100 (kubota deck) will fit the b7500? They look to be the same specs, guessing the 2100 came before the 7500. Thanks!!!

Gents, I am getting ready to build a shed for the tractor, amongst other crap. The tractor will determine the length (or depth) of the shed, and I have not bought a box blade yet, but plan to in the near future. My setup is a B2100 (no BH) with FEL. How much more length would a 48" BB add...

After MANY nights browsing other threads about different lighting options, I finally settled on a design that fit my needs & tractor. Here is a breakdown of what I did and some pics: *As for the lights, my wife was kind enough to put a Tractor Supply gift card in my Christmas stocking. So, I...

Just purchased my first tractor- a Kubota B2100 from a local dealer for $6,900. It came with turf tires, a FEL, hydro trans, and only has 675 hours!! It was previously owned by a gentleman with a few acres. Do you think I got a good deal?

Just bought a used B2100. All fluids and filters needed to be changed and were. The FEL did not function well when first run. All fluids and filters changed and now it seems worse. Doesn't respond properly to control movements, no down power (won't raise the front wheels off the ground)...

I have a 99 Kubota B2100 with 1500 hours ... the loader is well used, but still works great. The issue - the valve block has started leaking, it leaks at the spring end of one of the carriers (if that is what they are called) ... should there even be fluid in that area? The quick connects also...

Hi Guys, New to the site and not much lurking yet. I happened to run across an amazing deal on a B2100 with FEL that I couldn't pass up. Long story short, I now own it and need to use it properly. It's a 1998 with 540 hours on it, HST. That's my girl in front. I have just over an acre...

I don't have any current to the starter. My battery is fully charged. When I cross the terminals on the solenoid the starter spins but doesn't engage. Any ideas? Thanks

My B2100 with hyrostatic four-wheel drive (FWD) keeps slipping into FWD. The lever s place in such a way that I believe that maybe my leg bumps it and nudges it into gear. And no, I don't have thunder thighs! I think having it in FWD unnecesarily is increasing front tire wear. Anyone else...

I have a B7610 (which is the same basic tractor as the B2410, B7510, B2400, B2100, B1700, B7500, B7410, B7400, etc), and currently use a 5' back blade (too short, need a 6' to cover my tracks with the turfs set wide) for accumulations under 6", and resort to the Woods SB60 blower for anything...

I am looking for a part number for the PTO shaft that connects the mid moount mower deck to the tractor. The mower deck is a rck 60-24. Thanks Passntime

OK ON A 1996 B2100 IS 1700 HRS A LONG TIME AND HOW LONG DO THEY GO BEFORE PROBLEMS START HAPPENING. THE STEERING HAS ALOT OF SLOP IN IT UP AND DOWN SIDE TO SIDE ANY IDEAS. IAM LOOKING AT ONE TO BUY HE WANTS 4000.0 AND ITS A GEAR MODEL. THANKS FOR ANY INFO

can a b2100 handle a 5' box blade, and a 5' brush hog?

I have been web surfing for this info on and off for a couple weeks and I think the answer is gonna be "not without custom mods." I called a dealer and they didn't "...know for sure." Some of the info I found seems to indicate that some other front mount implements for a B2100 use the same...

While I was dismounting my tractor yesterday, the hammer loop on my coveralls caught on the three point float adjustment knob and did a great job of tearing the plastic up. I have the new plastic ordered, but I'm curious how the end knobs on the three point and 4WD levers come off in order to...

Looking into a block heater install on my tractor. Anybody have any sources for purchase of a good quality, reasonably priced heater? Kubo

I have had a B2100 for about 9 years. My tractor used to be in my heated garage but now is in my barn. My B2100 has fel, 5' back blade with a Buyers salt spreader mounted to it, and a curtis cab with a heater so I was wondering where the engine block heater would be installed. Would it interfere...

On occasion, it has been difficult to get all controls in the right position to have all the safety interlocks work for starting. Today, my wife got stranded when she turned off the tractor and it would not restart. After trying a few things, I ran a wire from the + side of the battery to the...

I have the opportunity to get a 12-15 year old Woods 750 at a really good price but cannot find any specs online. The owner thinks you need 40HP. It does not appear "large" but no idea of weight, etc. It is a 3pt how, so next is trying to figure out if a sub-frame mount is available or can...

I'm contemplating upgrading from my B7100HST. My B7100HST is a late-model (I'm told by PO '98) with a Woods DuAl 145 quick-detach loader. I have brand-new turf tires and wheels on it, plus the original tall & narrow-style R1's. I love the B7100HST, but there are two things I feel it...

I just bought a used front mount snow blower (B2660) for my B2100. The snowblower frame that came with the snow blower has a hydraulic lift. I have never used an implement with hydraulics with this tractor and I have a few questions. I know I need to purchase a compact single spool hydraulic...

I need some guidance from anyone who owns a B2100. Looking at one with 575 hours. Great sheet metal, clean. Priced right. How do you like yours. I would use it in my vegetable farm pulling a potato planter(one row), one row planter for vegies and hauling in produce in a two wheel trailer. How...

Hey Everyone, I recently purchased a B2100 from a repo auction. It has 1049 metered hours on it, and looks in great shape. I currently have TWO JD 400 tractors, but the Kubota was just calling my name. The only thing is, this is my first diesel tractor and I'm wondering if any of you "seasoned...

I just bought a 1998 Kubota B2100 hydrostatic transmission (578hrs) with a LA301 loader. Can I run other hydraulic equipment off this tractor without damaging it? It doesn't have any QD's for tapping into the system and the loader runs off a pump in the transmission. Specs say the pump is...

Ok, I have done several searches and think I know the answer, but would like to get some opinions. Recently purchased a B2100 with about 600 hrs. Looks and runs good but has a lot of blowby at lower speeds and idle, the end of the tube is wet with oil when I shut it off, and it will fog up the...

I know a guy that would like to sell his B2100 with FEL. Tractor has 150 hours and has been kept garaged. What kind of price do you suppose one could get for this machine? Thanks CM

Hi, all, I am looking at used backhoes but can't find any good application guides on what backhoe models will 1) fit and 2) be accurately sized. For Kubota brand, I have read that the B4672 was the appropriate model when the tractor was new. But I have seen other things indicating that a...

Anyone want to guess the fair value for a used 2000 B2100 HST with 520 hrs. No attachments or decks, this is for the tractor only (no loader). The condition was very good as far as I could tell. The current owner used it for mowing only but is keeping the rfm for his new tractor. I forgot my...

Hi all! My first post here. I am considering buying a local 1 owner 2000(year) B2100 4WD (450 hrs) with a 5 ft belly mower. Clean and Garage kept. I can only find 1 thing that worried me. I noticed what seemed to be hyro fluid(clear and clean) right in the very front edge(center of the deck)...

Alright folks, first post, so I hope this comes through and makes sense. I have been luking for a while and have learned a lot... thanks ahead of time to those here who offer advice! I have been in the market for a tractor, as we recently purchased 4.5 acres of relatively flat farmland next to...

Is the B2100 set up to handle a post hole digging auger? If so, are there any recommended makes/models/sizes that would work in harmany with this 21 HP tractor?

Looking at a used b2100 Kubota. I am new to the tractor scene but have been doing quite a bit of homework recently. I have 5+ acres 2.5 finish mowed and around 3 pasture that I need to keep up with. Lots of tree work for the forseeable future as the ground have not been well kept. My questions...

Looking at a used b2100 Kubota. I am new to the tractor scene but have been doing quite a bit of homework recently. I have 5+ acres 2.5 finish mowed and around 3 pasture that I need to keep up with. Lots of tree work for the forseeable future as the ground have not been well kept. My...

I was looking at new Kubotas, then found a used B2100 with 215 hours on it. Has a 60" belly mower and loader. 4WD, bi-speed turn, hydostatic. trans. The owner garage keeps it and has all the annual maint. records. It's cleaner than my Merc. What's a fair price for this thing? Thanks in...

Well, stranger things have happened, I guess. Went to the dealer on Saturday for fluids and filters for my B2100 HST and getting out of the truck the lady said " I think we need a bigger tractor with a backhoe". When I came to, I checked the date and it wasn't April 1st, then I saw her...

What\'s a B2100 worth Its been a while since I read all these sagas about selecting one Kubota over another. I wen thtrought he same thing when I bought my B2100 HST with Loader a couple years ago. Almost bought a B7300 or something but was convinced by everyone that the extra weight is worth...

I'm looking at two used tractors: a B1750 w/ 200 hrs., no attachments for $8000 or a B2100 w/ 1200 hrs and a 54" mid-mount mower for $9000. I need a mid-mount mower and a loader. Which of these is a better deal? Any advantages of one over the other? Thanks for your advice!

ok, so I went brain dead for a few minutes changing the hydro oil on my B2100 HSD. The question is, there's a 17mm capscrew smack dap in the lower middle on the front of the rear transmission case, right where a steel hydro line comes from the filter. Hmmm, same size as the drain plugs, hence...

ok, so I went brain dead for a few minutes changing the hydro oil on my B2100 HSD. The question is, there's a 17mm capscrew smack dap in the lower middle on the front of the rear transmission case, right where a steel hydro line comes from the filter. Hmmm, same size as the drain plugs, hence...

I'm looking to find out the going price for a 1997 B2100 with a LA301 Front-end loader & 42" box blade. The tractor is 4wd and has 1100 hrs posted on the hour-meter. Other than a torn seat & a little fading of the paint it appears in good shape. No obvious leaks, etc. What's a good price for...