kubota b2710

Hi. Semi-Newbie Here. Have read through the forums without being able to find an answer to my particular issue. (But have found a lot of other great stuff I didn't know!) Issue I have is that the back mower implement will not raise. It did last season. Brought it out of storage. Changed the...

There’s an LA402 front end loader for sale that will come off of a Kubota B2710. Will it fit directly on my B7800? Tractor data says the at they both take an LA402 FEL but I’m wondering what else I will need to fit it to my B7800. My B7800 has never had an FEL on it. Thanks.

Have a B2710 I’d like to add a set of rear remotes to. Have the valve with open center/Power beyond kit as well as the Kubota hydraulic piece to mount on the side of the transmission case. (Plate is removed and this piece is bolted in its place for an hydraulic in/out). Question is, I believe...

I have a b2710 with about 500 hrs. The range selector lever (L,M,H) moves freely and with no resistance. The tractor is stuck in high range and otherwise runs fine. I checked the external roll pin and it is not sheared, so I think the issue is internal to the range select housing. I am...

Hello All, Our Kubota has a front loader and a mowing deck, we used the tractor for light excavation work and mowing on our property. The tractor has approximately 200 hours, we purchased it new in the early 2000's, it is a 27HP Diesel. I was hoping to receive input\recommendations on...

My B2710 has 2 options for setting the power take off speed: "PTO" and "540". The manual for the chipper suggests adjusting throttle to about 90% of maximum. My assumption is with the PTO setting the speed of the PTO is directly related to the engine rpm, whereas in the 540 setting the rpm of...

My seat rail broke. I welded it up but I can see the problem (why it broke). Other Kubota owners should probably unbolt your seat and LOOK for cracks. If it's just cracked and all the parts are still together, you don't need to weld. Just countersink the hinge base and re-tighten. With the...

Last night I connected my rear mount snowblower to my B2710 and hitch would only lift the blower a couple of inches. After a few minutes the blower did come all the way up and now will not go down. I use a rear mount mower and had no issued during the mowing season. The tractor was warmed...

She's in the barn. Kubota B2710 HST with LA402 loader, & R4 tires. 271 hours on meter. A tad lighter than I'd been aiming for but much better on the wallet ($10k). Implements to be ordered tomorrow... Best text ever!

Hello TBN! I'd appreciate any thoughts on this tractor: $10,900 B 2710 Kubota 4X4 Tractor with LA 402 Kubota QA Loader w/ Joy stick control & RCK 60" mower deck Diesel 30 hp Made in 2003 Hydro - HST Drive Hi - Med - Low Ranges 3 pt Live PTO 4X4 LA 402 Kubota QA Loader Joy Stick controls RCK...

I have owned the Kubota B2710 for about 1 year and half. It has a loader, and 72 mower deck. It had just under 1300 hours when I bought it and has 1400 give or take now. About 2 weeks after I bought it from the dealer all the seals started to leak. So bing had them all replaced, and the...

Okay, I have a shot ignition switch in my b2710 (very similar to b2910 or b7800). I have a new switch; however, I'm unable to access the backside of the panel. I think that I may need to remove the throttle lever to loosen the black rubber panel behind the gauge panel (sorry if I'm not using...

I have a b2710 . I just rebuilt the rear end after a catastrophic failure of the locking differential. The locking nubs sheared off internally and got caught in the axel gear causing it to blow a hole in the diff case. All is rebuilt now and working fine. A pre existing problem from before is...

Have a frien who has a B2710 kubota rear axle seal leaking and just happened to pop out. Have looked at kubota parts diagram and from what I can tell from best judgement is if I take the axle housing loose will it slide out of the case. I do realize there is a snap ring holing a inner bearing...

Getting ready to sell my 2000 B2710 with 850 hours. It comes with a front end loader 60" bucket and a 72" mid mount kubota mower. The local dealer is telling me to ask $12,500 What do you think?

I have found a 2001 Kubota B2710 with loader for sale for $9950. The tractor is 4x4 with 1536 hours. It appears to be in pretty good shape but that seems high to me. What do yall think?

my kubota b2710 wont crank. Changed fuel filter(looked real dirty). my question is when bleeding system at injectors should fuel squirt out or just drip out when cranking

Yesterday I drove by my dealers lot and saw a used B2710 with a Curtis sunshade and a 72' mmm on the lot. I stopped and looked it over, it has 834hrs but you could never tell by looking at it. Whoever owned it took excellent care of it. The three point arms did not look like they had even been...

I have a 2000 B2710HSD w/R4's and want to change them to turf wheels/ tires. I understand that I have to change both the wheels and tires but I'm having a difficult time finding the part #'s for the turf tires/ wheels. Can anybody help? Also, do I have to buy them from Kubota or does anyone know...

I bought a 2000 Kubota 2710 hst 4wd in July of 2011. The Kubota dealersip had put a new clutch in prior to. I used it for 10 hours and had to replace the clutch. I used it again for 12 hours and the clutch came out again today. It's getting very frustrating, not to mention Expensive...

I bought a 2000 Kubota 2710 hst 4wd in July of 2011. The Kubota dealersip had put a new clutch in prior to. I used it for 10 hours and had to replace the clutch. I used it again for 12 hours and the clutch came out again today. It's getting very frustrating, not to mention Expensive...

I bought a 2000 Kubota 2710 hst 4wd in July of 2011. The Kubota dealersip had put a new clutch in prior to. I used it for 10 hours and had to replace the clutch. I used it again for 12 hours and the clutch came out again today. It's getting very frustration, not to mention Expensive...

Would like to know where I can purchase a cab for the tractor...may keep me dry then...when snowplowing our Niagara area (Ontario, Canada) driveways :laughing: Also where may I find the owner, repair, maintance manuals on here please As I am the new proud 2nd owner & want to understand & keep...

I would like to purchace a backhoe with a three point attachment. I don't need a large one. Anyone have an idea what I should look for and where to find it? Found a B4690B for $5000 used...is that a good price?

Hi All, I came by a 2000 Kubota B2710 online and i have the moneyready to buy it. It is a 2000 Kubota 2710 with 1470 hours w/ Cab and A/C, 5 foot Kubota mid mont mower and, Kubota 51" front mounted snowblower for $8,900. Also, I would like to buy a LA402 loader, but after buying the tractor it...

I have a 2000 year B2710 that came with R3 Turfs. It currently has Firestone field and turf 13.6-16 "on 10" rim" stamped on tire and the best I can tell the rims are 10" Wide. The rear rims themselves have Titan 16W X 10L stamped in them. The fronts are 23 X 8.50-12. I have went to 2 different...

I have a B2710 with 60" MMM and loader. I'm looking for backhoes that I can use with my setup without removing the MMM mounting brackets. I have so far seen an older Woods 750 (NOT 7500) BH which needs a hydraulic pump for $2500, a newer Woods 7500 for $3500. However, the 7500 subframe is not...

Hello, new member soon to be Kubota owner needs some help/advice. I have been shopping used Kubota's and have to decide between a used B2710 650HRS, HSD, 4WD, Mid/Rear PTO, Kubota Loader 60" Bucket in average condition for 10500.00 and a B7500 500HRS HSD, 4WD, Mid/Rear PTO, Woods Brand loader in...

Searching the web, I seem to find listings for unsold new B2710HSDs that have telescopic lower link ends (not the sway control links, but the lower 3-point drag links). My B2710HSD ('99 or '00 model) doesn't have these. Does anybody know if these are available as a retrofit? I guess I could...

just wondering i have a friend with a b2710 fel and backhoe 340 hours of lite use he wants to sell for 12000 in ny is this a good deal. Thanks

This is my first post here. I'm looking to buy my first tractor and looking in the orange direction after reading all the post here. My question is, I've found a B2710 w/ 130 hrs. on it with FEL, Tiller, Finishing mower, Post hole digger, scrape and box scrape, All looks new, been garaged. Price...

From MN DOT Kubota Loader / Landscaper section B8032 Top & Tilt kit includes cylinders and hoses $588 B8042 Remote valve kit for rear attachments, includes 3 spool valve, bracket, hoses & quick couplers $796 Anybody know if this "will fit" on a B2710? It looks like an easy way to add Top &...

Thought this was a strange one. We were picking up a tractor at another dealer last week and ran into a NEW B2710HSD. The dealer had never sold it and wanted to get rid of it so we transferred it in. It has full warranty and the whole shabang. Just kind of weird to see something like that.

I need to sell a B2710 with 385 hrs on it. I bought from the original owner in August 2005. It had about 300 hrs on it when I bought it and now has 385 hrs. It has new tires on the front and the rears look very good - turf tires. I had the rears filled about half full w/ water and antifreeze...

FYI I saw this on e-bay. I picked up a canopy from this buyer a while back, great folks, they are near York, PA. This for the CAB ONLY not the tractor. Happy bidding E-Bay

<font color="blue"> </font> I'm a new tractor owner and my new Kubota B2710HST has 6 hours on it. I've mowed my place twice pulling an Industrial 60 inch finish mower. I'm supposed to run the engine at 2600 RPM to get the rear PTO up to the required 540 RPM. Since I'm new to tractoring...

I'm running one of the older B2710's (serial number before 15496). I only use one hydraulic filter and the hydraulic suction filter (strainer). I'm a little confused as to which hydraulic filter I want. The Kubota look-up page calls for 67955-37710. TractorSmart notes the same part number...

First time post after much observation. I currently own a J Deere X585- 4WD tractor w/ full glass cab, mid mower, front loader, 3 pt hitch. But, now I want a real tractor! I own an RV dealership where we have used 2 Kubotas for years & find the bullet proof, so I feel comfortable with one for...

B2710 Hydraulic Leak... I Can\'t Believe This! Was doing some hoe work this morning, stepped down to do some work on the ground and noticed a pretty fair flow of fluid running out from the belly just behind the rear cross member of the loader frame. Shut things down and discovered that the...

I'm looking at these two - my wife prefers the idea of JD..Kubota seems a few less $$ If there's anyone out there who chose either of the JD compacts I mentioned over the Kubota for any reasons to do with the performance of the machine (ie assuming the dealers are equally good) - I'd be really...

JD with JD loader - 410 loader Kubota with LA402C loader Narrowed it down to one or other of these I think - here in the UK they are similar $$ for each package. I ruled out blue as I don't have a suitable dealer near enough. I'd be interested if anyone has faced the choice I have - and which...

Hey SANDY, Thanks for all the research and info you did on Kubotas . They are the best. Can't wait to get my Grand L 3130. Trying yours conviced me. If anyone knows where I can get a Kubota coffee mug , let me know . I owe Sandy one.

After a long day of tractoring, I decided to blow my tractor off with my air compressor and found that the top of my midmount mower was covered in hydraulic fluid. I removed the mower to find that the line that was connected to the left side of the cooling coil, in front of the radiator, had a...

I have narrowed my search down to these two tractors. The JD 4210 is nice but it is about $800 more than the B2710 with an FEL and 60" MMM but it is more tractor than I need or can store easily. I drove the JD 4115 today and liked it except for a few things. The tractor is noisier than the...

I have been looking at Kubotas for some time now and narrowed it down to a B7500HSD or a B2710 HST. I have a quote for a B2710 that is $18,002 delivered out the door. This includes the B2710, 402 FEL, 60" MMM, R4 tires, loaded rears, and a rear work light. This is the best I have been able to do...

I have been looking at Kubotas for some time now and narrowed it down to a B7500HSD or a B2710 HST. I have a quote for a B2710 that is $18,002 delivered out the door. This includes the B2710, 402 FEL, 60" MMM, R4 tires, loaded rears, and a rear work light. This is the best I have been able to...

Considering buying a used B21 TLB with 850hrs slightly beat up for $14,500 or a used B2710 w/loader for $12,500 100hr looks like new (just out of warranty) To be used on 10acre property to move dirt stone and cut a field once or twice a year. Which tractor do you think would better suit task...

With LA402 FEL, Bush Hog RDTH60 finish mower, Rhino SE5 (used- like new)field mower, Box blade, R4 tires, delivered. $17,500. Am I close? Kubota has 5.49% financing for 60 mo. til friday. This was a little more tractor than I was originally looking for (see Northern Tractor thread) but...

My b2710 HST has 50 + hrs on it. Now I want to change my oil & filter and Hydraulic Trans. oil & filter. It has 2 hydraulic/trans. filters. one on the left and right. Are these the same ? I'v seen part no. on the net #66021-36060 & #66021-36390 S Some other Kubota model has: S , T , H. at...

What is the difference between the 7400/7500 series and the B2x10 series? price, options, etc... TIA!!

I could use some help here. I am pricing a B2710 in southern New Hampshire. A visit to the dealership resulted in the following quote: - 2710 w/402 FEL............$16900 - 60" mmm.....................$..2350 Total...............................$19250 I think this is at least $1000 to high and...

I traded my b7500 for a B2710hsd for $3825 difference. did I screw up on the price.

Hi everyone I`m considering a purchase of a tractor for awhile now. I`ve gained alot of my present knowledge in these forums. (thanks). But I`m still unsure about what to do. I have 8 acres on a lake in Ct. About 2 acres are landscaped (grass,beachfront,paths,flower beds etc.) Another 2 acres is...

Can someone tell me the difference between L2900 and B2710 (beside model year)? For example, horse power, size, weight etc? I have heard many good things about B2710 but have not come across anyone owning L2900. Any input is very much appreciated.

Today is decision day and I am looking for any comments from the board. Thanks Harold

A plumber frend of mine installed my septic yesterday and brought along is new JD 4200 with backhoe. He didn't dig the big hole with it (his big yellow JD did that), but his son got up under my porch awning and finished digging the trench. I didn't drive it but it is an impressive looking...

I was curious about getting a B series. I was thinking of getting a B2710 R4 tires front loader and adding the Woods 7500 backhoe. Is the B21 a better-stronger workhorse for mainly loader and backhoe work or should the B2710 out perform as it has more horsepower? Physically which tractor is...

I am currently searching for the best price for the B2710 with a loader I live in CT any suggestions how or where I can get the best price? Thanks

I am considering the above mentioned tractors. I will be doing mostly finish mowing, and some tilling. I notice that the orange is much lighter. Is this an advantage, and why? I am guessing that the lighter tractor will not tear up the turf as much, but will it still handle a tiller? THanks.

I am in the process of doing the 50 hr service on a B2710 and would like to clean the transmission oil strainer. Non of my sockets will fit the nut that holds the strainer - it looks to be about 26 mm - anybody know which hex socket will fit ?

All things being equal, those of you that own the B-2710, would you now spend the extra bucks for the B-2910 since it has now recently become available. Thanks in advance.

Hello, Thanks in advance to all who take their time to help out the new folks. I am very seriously considering the Kubota B2710. My local dealer has a 99 rental return with 84 hours and the kubota loader for $15,750. However, a dealer 3 hours drive away has a new one with loader for $16,073...

I am very interested in the Kubota line and have found 2 similar models that I like. Just wondering the differences between these two lines, besides the transmission. Thanks in advance!

I am in the process of deceiding whether to buy a JD 4200 or a Kubota B2710. This will be my first tractor. I will use it for mowing and general loader work. I really like both tractors. The specifications seem rather similiar except for the weight of the tractor. The Kubota is 900lbs...