kubota b5100

can someone tell me where the 4 wheel drive lever is on my kubota b5100 tractor? thanks bob

Hose was cracked and leaking and I replaced it. Cranked at first then died and will not restart. I loosened the two bleed screws and let fuel drain out then retightened them and still won/t start. I read the manual and solved the problem.

I am making a FEL for my Kubota B5100e, in an effort to save costs I would like to use the existing hydraulic pump, in theory I should be able to tap it somewhere for the feed and find a return line to add. I don't know Hydraulics very well at all this is my first time dealing with them, any...

Hello all, I am looking for advise on making a front end loader for my kubota b5100e, I know how to weld but I have no idea about what material to use or how to design it. I have ideas of how to design using a mix matched of other peoples designs and reading about what they would change...

I recently borrowed a 80's era, badly neglected Kubota B5100 4WD. When you drive the front end will suddenly lock up. Back up a bit and keep going and you're good for a few more feet. It will do this both forwards and backwards. On closer inspection it is missing several bolts that hold the...

Picked up a little Kubota B5100E tractor to restore for a winter project. Tractor came with the mid mount mower and a Kubota snowblower converted to fit front of tractor. Tractor has to be one of the rustiest little tractors I have found. Plan is to strip it as far as practical and sandblast and...

I'm looking for a smaller tractor to work up some food plots on my land, maybe use a brush hog a couple times a year. I've come across a B5100E for sale. I'm not familiar with anything bigger than a garden tractor.... Anything I should know about this model? I read that the B6000 has a...

Freind of mine is looking for little hoe for his B5100 4x4 - does anyone know the model number(s) that would fit ?? Thanks

Kubota B5100 3PT Hitch Capacily - will it handle a 48" box blade? 42" Tiller? I have a Kubota B5100D 4x4 tractor that has always served me well. It is a 12HP 2 cyl diesel, with a Cat 1 3PT hitch. I don't know the lifting capacity of the hitch. I've used a Johnny bucket fully loaded with...

Can anyone tell me what thread size the hydraulic port, with the handle, under the seat is? I'm assuming it's metric? It leaks when the revs are high, so I'd like to get a plug for it until I can fix the valve when I overhaul it in the winter. Thanks, Jim

Can anyone tell me what thread size the hydraulic port, with the handle, under the seat is? It leaks when the revs are high, so I'd like to get a plug for it until I can fix the valve. P.S. The port, with the handle, under the seat reminds me of the booth, in the back, in the corner, in...

On Friday I built a counterweight for the front after having little luck keeping the fronts on the ground while tilling. Drilled four holes in a section of channel and got some longer bolts to replace the metric front PTO bolts and mount the channel. Two 5/8" bolt heads welded to the channel...

Small oil leak Hi everyone, This is my first post to the forum, so Hello! I've been a lurker for the past couple of years, and am finally ready to buy a tractor and join the ranks of you fine gentlemen. Thank you to everyone for making this forum such a welcoming, helpful place on the web...

This question is for my BIL that is not a member of TBN (yet). He ran his B5100E out of fuel and it won't restart. Could someone please respond on how to bleed the fuel system to get it to start again. I have never owned an older tractor, so I only know how to do it on my BX. Thanks for any...

Hello, Does anyone know if a mower attachment is available for my B5100 tractor, and if so where one might be available? Thanks, Buddy

I'm considering buying a B5100E with a RFM for cutting parts of my lawn that are really too rough for my yard riding mower, but areas I'd like better looking than my rotary cutter. After all, my rotary cutter is pulled behind my 45 hp tractor that weighs close to 5,000 lb. I could put a RFM on...

I'm looking for instruction manual for my Kubota B5001 1985y. Can somebody send by e-mail in pdf?

I have Kubota B5100 and I'm unable to find replacement front wheel rims. I would prefer finding either used turf tire rims or used ag. tire rims. Anyone have suggestions?

On Friday I picked up my second B5100. This one has obviously once had a mid mount mower on it, going by the linkage from the arms to below the footboards. I've seen a picture of a 5 or 6100 with drive to a mid mount mower coming from the front of the crankshaft. Can anybody tell me more about...

I just got a b5100e and checking all the fluids. And I came to the transmission fluid and cannot find the dipstick or sight glass. Can some one help me? I think that it is low because the 3 pt hitch goes up but acts like its got air in it.

happy new year everyone.i want to fit a tipping pipe to my b5100 .although it dosnt have a diverter valve under the seat it has an outlet thet is blanked off.does anyone know if a tipping pipe can be tapped in here and if the trailer will tip when the tpl has reached the top or could this damage...

Hi there has anyone out thee a user manual for a b5100 that they could email me? Its easy to figure where to change the oil etc but how do figure tyre pressures etc? also need info on fitting a tipping pipe to the tractor as it dosnt have one.thanks in advance Fergus

Hi all just bought a b5100 one owner tractor which has got very little use but it is not charging the battery.Everything on the tractor is origional and everything else works.Has anyone out there got a wiring digram or maual they would email me to get this little gem sorted?

I've been looking for a little brush-hogging tractor for a hilly piece of ground and didn't want to spend much more than $2,000. But I just found the following ad on Craigslist and it seems interesting. Problem is, I've been reading up on old Massy's, Internationals , etc. and didn't expect to...

Where is the best place to purchase owners and maybe even shop manual for the B5100E. I just bought a used one this weekend Thanks Larry

I don't know what's going on with this thing. About 15 minutes after I start it up antifreeze starts trickling out of the overflow pipe. It doesn't spew out like steam, just trickles. It doesn't have a temp guage so I can't tell if it's running hot but I wouldn't think it would after so short a...

I need a picture of the hour meter for a B5100E. Mine was missing from the instrument panel when I purchased it and I don't like the big gaping hole. I want to put it back like it's supposed to be. I found one that had the tach and the hour meter combined but I don't know if that's what it...

Just joined after reading for a month. I have a early B5100D 4x4 manual trans. tractor and am wondering about my options for getting hydraulics for a B748 front mount snowblower. I have the diverter valve under the seat and I understand that if I use the aux,. port on this I can just use the 3...

Just wondering if this little bota has a FEL which will fit it.If anyone has seen or hered of the possiblity.

Still checking out a low hrs B5100 and was wondering if anyone out there has used one with small bush hog rotary cutter and if the machine has the power. I will be maintaning about 3 acres of woods and small meadow area. I would like to put as small as possible a cutter on this so I can get...

Can't seem to get this tractor to start up. Here is what I have had done so far: - fuel injector pump serviced and calibrated; - fuel injectors serviced - new glow plugs - fresh fuel - new fuel filter When I crank on it, I don't even get a pop but I get white smoke from the exhaust. I have...

I have the chance to purchase 1982 Bota B5100 with Woods finish mower with only 148.5 Hrs.Older gentlmen has had it since new and always main. it but never used it.I was hoping someone out there could help price it for me. Thank You Mike

buykubota-ML-747147-ML- Forum Rule #1 - 1. Please post in the correct forum (brand specific goes in a brand specific forum)

I have the chance to purchase a 1982 B510 with a wood finsh mower on the 3 point.The unit has been used only 180 hrs. and the old gentlman just wants it out of his barn, it is as new condition always main. but not used.I woulds like to know if any one can put a price on this great old tractor...

owning-ML-739973-ML- Posted in wrong forum

I just got a B5100E and I need to replace the battery (the one in it is 365 CCA and is dead). The owners manual doesn't say much about what type of CCA I should be looking for. I would rather not go to the Kubota dealer to get the battery unless I have to. Anybody got any advice or specifics...

I have an opportunity to purchase a B5100 4wd with approx 1000 hrs. It has turf tires, 48" deck, 2 cyl diesel 18 HP. They are asking $3000. I do not know much about Kubota or there value. I have been trying to look up info but don't see much on this model. Any information or advice would...

I am looking at buying a B5100 4x4 kubota. It has terf tires now but they are pretty old. If I were to get it, I would need to replace them soon. How much would it cost roughly to replace them? What about the cost of going with ag tires instead? For ag tires, do I have to go with a...

Hi there, I'm condiering buying a used B5100E. It is 2-wheel drive, 1500+/- hrs, comes with dozer blade, weights, mower. It seems to be in fair to good condition. What would be a decent price on such a unit? And, btw, I'll use it for pushing snow and tilling.... Thanks,-arthr

Could anyone tell me a compatible oil filter for the b5100e? Thanks in advance.

I just picked up a b5100e with a woods belly mower and a snow blower. I'd like to hear from any other b5100 owners how they like theirs and what I should watch out for. Thanks in advance.

I just picked up a b5100e with a woods belly mower. The mower looks VERY durable and seems to be built for something heavier. I have the manual and I know it is for the model I have. I am wondering if anyone else has any experience with one and could tell me about how well it works. I'm...

I am looking for a AG R1 tire to fit my Kubota B5100 rims. The turf tires I have on now are 15x8.5x27. I phoned a few local tire shops, and they told me that they couldn't get a AG tire in that size. Does anyone have an older B series Kubota with AG tires on its that are that size, if so who...

I am looking for a digital copy of the manual for a Kubota B5100. One that I can keep on my computer.

I'm looking for a part number, for the headlights in the Kubota B5100. Does anyone got any good web sites of headlight manufacturers. Thanks

Grass Catcher is there such a thing for a B5100E. Or has someone made one. If so, could you post some photos.

I'd like to add a rotary cutter to my Kubota B5100D4WD, see pic. My manual says max capacity is 44" 250#. Everything I find is larger and heavier. I won't need to use it a lot - so light duty is OK. Any thoughts? I would consider a 3pt finish mower but would like to keep the cost below...

I hope I am not breaking any rules or showing horrible etiquette but since the classifieds are being worked on... I put a shop manual for Kubota B5100, B6100, and B7100's up for sale on ebay last night. If anyone is interested the auction runs through Sunday evening 4/21. I traded in my B7100...

Gentlemen, I have the opportunity to step up to a slightly larger tractor if I can sell my B5100e. The problem is that I have no idea what price I should put on it. It is in great mechanical shape and good cosmetic shape. The paint is faded, and it has a couple of dings in the sheet metal...

I have a 1981 B5100E (turf tires) with the following Kubota attachments: single-stage snow blower roto-tiller rear blade lawn aerator mold board plow 42" mid mount mower I have 3.5 acres, 1 mowable. The other 2.5 acres is an overgrown field. I want to start maintaining the field but I don't...

I have a 1981 B5100E (turf tires) with the following Kubota attachments: single-stage snow blower roto-tiller rear blade lawn aerator mold board plow 42" mid mount mower I have 3.5 acres, 1 mowable. The other 2.5 acres is an overgrown field. I want to start maintaining the field but I don't...

I realize a B5100 is kind of small but can these tractors be equipped with a front end loader? Thanks for any input.