kubota b9200

I have a B9200 and last time i used it all hydraulics stopped working has been 150 hours since last service, 3 point and loader as well as transmission do not work Thinking Hydraulic pump, and will it need to be split to replace the pump.

Looking for midmount deck for Kubota B9200 can be RC60-92h or RC60-82h

I’m new to the tractor world and just purchased a used B9200 kubota. Engine runs great, bucket works pretty well for a 20+ year tractor but the wheels lose power when I try to scoop a bucket of sand or dirt or anything really. Thought it may be fluid but they all look decent. It runs better...

I'm new, And would like to know if the rim splits apart.. Thanks

So I've been bragging about my b9200 being bulletproof and karma got me. I have nothing electrical. When I turn the key on there's nothing, no lights, no fuel gauge NOTHING! Thinking it was the battery I put a new one in and still nothing. I then went to the key switch. I checked it with a meter...

I need new front turf tires on my b9200 the size is 24x8.5-12 its 4 wheel drive. The only thing I can find on the net is garden tractor tires. I have a fel so I believe they are light duty tires and wont hold up to the weight. Can anyone out there help?

Been putting off checking the valve lash and finally got "arountuit" today. It was interesting in that three of the valves were excessively loose in the neighborhood of 0.025". These three were near the "radiator end" of the engine. The three farthest from the radiator (at number 1 and 2...

I installed a new regulator about three years ago along with a new battery and new alternator (Kubota calls it a dynamo) just recently on my B9200. Still not charging as evidenced by the battery gradually discharging after quite a few starts. Have checked and don't show any draw when the...

Hi guys, just thought I'd post my new orange tractor. Just sold my b7100 last night...kinda sad. Anything I should know about the 9200?

Hi all....new member here. I have a B9200 HST that won't stay running. I think it's fuel related but after after testing and trying many things I still have the same problem. Any thoughts on this would be greatly appreciated. Symptoms are - Starts, runs and operates (moves dirt w the FEL and...

Hey guys, do you think the B9200 with FEL and 22 HP would handle this 6 ft. Harley Rake. My B9200 is hydrostat so could run very slow ground speed if HP was an issue. The published weight on the T6 Harley Rake is 830 pounds and the rated lift of the B9200 is 1014 pounds at 24" beyond the the...

I'm having trouble figuring out the threads where the Loader mounts to the frame it looks as though it's a 12 millimeter bolt very fine threads but all the 12 millimeter bolts that I have tried will not thread into the frame does anybody know or have any idea what these threads might be thanks...

I recently bought a Montana loader to attach to my Kubota 1989 b9200. There will be considerable fabrication with this project. Most of the welding will be done off the tractor but I see myself doing some tack welds during the fabrication process. My concern is damaging the electrical system if...

I am thinking about buying a Montana loader for by Kubota b9200. I think that this loader came off of a t2334. I cant find any specs on this loader on the net. This loader has never been mounted on a tractor it has all the brackets minus the control valve. The size of this loader seems to...

I recently purchased this tractor with a very nice trailer. However, once I got home, I found out that this tractor just doesn't fit me. I need a tractor around my home, but the primary reason I wanted one is to bush-hog and plow on my hunting lease. So I am looking to sell this tractor and get...

I just bought a Kubota B9200 and it has Lawn tires on it. They are really wide. I'm looking to switch to all Ag tires. Can I use the same rims? Plus can I buy the tires from someone other than a Kubota dealer? Who sells them?

Hi, I'm looking for attachments for the B9200 Kubota. I'm interested in a loader and backhoe and a snowblower. is there a manufacturer recommendation or dealer recommendation? Any direction or advice, is appreciated. Matt

Hi How and where can I find out what the weight capacity is for this loader? I have searched all over and I can't seem to find anything about it. The reason why I need that number is because I will be building or buying a ballast box and Ihave no idea how heavy it will have to be. Thank you...

This tractor has the combination of features I am looking for. Does anybody know of one for sale. AG tires are preferable. Accessories not critical. ,,,Thanks! ,,,,,,,,larry

Any thoughts or suggestions? Had this 9200 since 1990 and it's really been a great machine. I think HST will be more user friendly as Arthritis has gotten a hold of hands and wrists. Would appreciate any input you all might have. Thanks, smoker

Does anyone know where I could find one for my Kubota B9200 Its a 4wd, manual steering, hydro. I've tried all the dealers I know of and cant find it. It's a 2 pc and broke at the sleeve. If you have an entire box I may be interested in that as well or if anyone knows of a substitute box lmk Thanks

These are 12"x7" to take 23 x 8.50 x 12 tires The 6-bolt BCD is 115mm (4.53") and the pilot is 69.5mm (2.74") Two piece rims are standard on this model but single piece would be fine.

The attached page is from the B9200 Operator's Manual showing the auxiliary hydraulics. My question regards the "From the neutral port of implement's control valve" which is the FEL. What is the function of the neutral port on the loader valve? Is it something like a case drain as opposed to...

Hello, My question is for B9200 HST owners. I don't see any serial number on the tractor I'm looking to buy. The manufacturer tag is there showing the model and summary specs but the serial number is not on it. Could you please check on your tractor and tell me where it is located? The more...

Hi ...well I have a B9200 that just started making a noise from around the area your feet rest while sitting in the seat.....and the front end loader will not raise.....it did a little but was jerky....I checked fluid and it is full.....did i loose a pump?? or do i need to clean the...

I need to replace my steering box on my MFWD B9200. The cost from the dealer is $1800. I have been seeing allot of steering boxes for L175/L185/L245 on the internet for under $500. Seems to be similar in size & layout to mine. Does anyone know how difficult it would be to get one of these to...

I broke the steering box on my MFWD B9200. It has manual steering and not the power steering. Started calling around to see what a replacement will cost and am getting serious sticker shock - the prices for the assembly are anywhere from $1200 to $1700. I guess that I am going to tear into...

Please see in private ads. Thanks, smoker B9200 Front Rims/Tires - TractorByNet.com

I have a B9200 that grinds when I change gears. This is a non-synchro, but it still grinds when I'm standings still & changing gears. Does not seem to to do it when changing ranges, just gears. Does not matter it I shift fast or try to ease it in (i.e. very slow). Is this a problem? Don't...

Does anyone have a B9200 with rear ag tires? I am in need of the size tires that you are using. Really would appreciate any help someone might give. Thanks, smoker

I have a B9200 and I have been very happy with it. I looking at a L2250 primarily because it has a backhoe) but would not mind a slightly bigger tractor. When it comes down to it, the B9200 has done everything that I needed it too, but anytime that I would work it, I never wished that it were...

I have a Kubota B9200 & saw someone selling a Ford/NH backhoe w/ full subframe that was on a 1520. Would I be able to get this to work on my B9200? I can do some cutting & welding, but am wondering if it is at all possible.

Hi Guys: I have a neighbor in Maine that loaned her tractor out recently. After a 3 week period she received it back. It now will not shift out of High Range. The rest seems to be OK but what can bind the internal workings of the lever? She is elderly and with limited resources so I am...

I have a B9200HST with belly mower... The deck does not seem to be lifting evenly. The right side barely lifts up with 3 pt completely raised. The left side of the deck lifts, but not quite as much as I would think it should... This is an RC-60 deck.. Any help would be appreciated... Thanks

I ripped a gash in the sidewall of my tire. The tire size is 6-12, and it is a R1 type tire. All I can find is a 4 ply w/ a load carrying capacity of 600 lbs. This seems low. W/ the FEL my tractor is close to 2000 lbs. A little weight in the FEL & the tires will be well past their rating...

I will be needing a box blade for a bunch of different tasks: clearing area to build stone base for driveway & pad, excavating moving spoils away for a house addition, etc. I'm not sure which size box blade. My tractor is a Kubota B9200. It's a compact tractor & weights about 1700 lbs (w/o...

I have a B9200 & the position control does not hold the attachment up. It has plenty of strength to lift the attachment but after it gets the attachment up, the attachment starts dropping down. The position control lever drops along w/ the attachment. Is this a simple adjustment?

My B9200 has been sitting outside. It's been cold lately (single digits at night up to mid teens during the day). I tried starting my B9200. Would hold the glow plugs on for 60 seconds, then crank. After two or three tries, it caught and would run (very rough & slow) for 5 seconds or so. I...

I need to replace a stabilizer arm on the 3 point hitch of my B9200. I thought that the 3 point hitch was a standard category 1 size. When I went to tractor supply, all of of the stabilizer links were way too big. Do I have to go to a Kubota dealer for this part? BTW, I think that my B9200...

How much would it cost to add power steering to to a B9200? Not 100% if I will need it or not, but do plan on doing allot of FEL work with it.

I've been thinking about getting my 2500-hour L4200 a baby brother, and ran across a B9200 hydro TLB. I want a smaller rig - my 4200 is up at my camp, and it is appropriately sized for that property, but is way too big for my primary residence and surrounding postage-stamp sized 1.2 ac. I also...

Just got a B9200. Read over the owners manual & have the following questions: Oil change: The manual recommends various oils dependent on temperatures. In each temperature range, they allow the use of a 10W-30. Would a 15W-40 diesel grade oil be OK to use? Coolant: The manual mentions that...

I just got a B9200. At least need to get a operator's manual, but would also like to get a service manual (if it is cheap enough). I'm seeing prices on the internet of $30 & $90 respectfully. Is there a cheaper source somewhere? Also, electronic (i.e. a pdf file) would OK too.

Jointed Team Orange! Just bought a B9200. It is a geared (non-HST) 4X4 tractor w/ only 530 hours. Looks like was stored outside as the paint is faded & there are numerous spots w/ surface rust. AG tires have decent tread, but beginning to crack between the treads. Tractor came w/ the BF350...

Found a B9200. It's a 4x4 gear tractor w/ 550 hours and has a FEL, Woods RM59 finish & rear blade. Seems like a great price to me. I will be checking it out tommorow. Somebody else is also going to be there to check it out too! I never owned a tractor before, but am mechanically inclined &...

Looking at a B9200 w/ BF350 loader & 4530B backhoe for $6900. Price seems good to me, but have not personally checked it out. It looks as if it may be in slightly rough shape, but this may be cosmetic. Unfortunately, it's over 500 miles away from me. I want to get some basic information...

Just got a B9200 with belly mower. When raising and lowering the rear 3 point hitch, the belly mower does not move. It appears to have linkage for that purpose under the tractor but nothing moves. Rear hitch works perfect. Is there a disengage I am missing??

I'm new to the tractor world and have a chance to buy a1990 B9200 with a Bradco backhoe for $10,800. It has 4 wheel drive power steering and a BF300 front loader 947 hours. Looks brand new. 23hp 4cyl Kubota v1200 diesel. PTO rear and mid mount, hydrostatic transmission is this a good deal...

Unit runs fine cutting grass for a about a half hour then loses power, almost unable to move. After a "rest" the unit works again and the cycle repeats. Any Ideas???

I'm got a friend looking to go 50-50 on a tractor with me. His buddy has a b9200. Both of us don't know too much about tractors, but we have a lot of knowledge in car/motocycle mechanics etc. So its a b9200, 4wd with a loader. It "has a blown head gasket" says the owner, and it has sat since...

I am looking for help with the price of a Kubota B9200 HST. Tractor is 4WD, has manual steering, 22.5 HP, mid and rear PTO, front bucket, 60" belly mower, back blade, and turf tires. Seller believes it is a 1986 and has 450 hours on it. He bought it used 3 years ago. Looks & runs great. Any...

New to the site, looking for a little help.I've owned this B9200 for about 10 years and have NEVER changed the Hydro fluid.I've changed the filter every year and added a quart of fluid.Not having any problems,however after talking with the local dealer he's suggesting that I change the fluid.I...

It sit for 3 years and now it is running fine but it will not move///it goes into the different gears(3 fwd-1rev) while running without depressing the clutch, but doesn't move what-so-ever...kubota says clutch is stuck and i need t split the tractor....and suggestions from the...

It sit for 3 years and now it is running fine but it will not move///it goes into the different gears(3 fwd-1rev) while running without depressing the clutch, but doesn't move what-so-ever...kubota says clutch is stuck and i need t split the tractor....and suggestions from the...

Hi, new to forum, got a couple questions, first how to tell the year model of this kubota tractor I bought, second, how many h.p. is a b9200 kubota? I purchased this from a man that said it was a 1996 but he got it with the property he bought,the b9200 came with a woods backhoe att.and fel. any...

My father has a 1987 B9200 HST without power steering and is attempting to put a bucket on it. Our local dealer found a Woods loader that will work, but is unable to find a mounting bracket for our specific Kubota. If we find a bracket for it, does anyone know how much it will cost to add...

Found a B9200 Tow tractor, no PTO, or 3 point for $2000 (has the Southwest Airlines sticker under the hood and everything). Anybody know if it can be converted/adapted to an Ag type tractor by adding 3 point, etc? Kubota dealer says there isn't a kit of parts, but could provide individual...

Hello all, I have a Kubota B9200HST and recently noticed fluid leaking from the cover over the drum brakes. Upon removal of the cover, it is definately transmission fluid. I'm assuming it to be leaking around the shaft and that a seal needs to be replaced. Has anyone else encountered this...

A friend of a friend has this Kubota equiped with a loader and 60 inch belly mower. It has 820 hours on it and appears to be in very good condition. I need help in knowing what to offer to purchase.

Does anyone have suggestions about places to look to find one for sale? I know it will be difficult. I've checked eBay with no luck, but will keep my eyes open. Are there other places that may have one of these for sale? I'm hoping to find a reasonable deal. I can't afford much, but this...

I'm new here, and yes, I'm a woman with tractor problems. I recently purchased a used (actually aged) B9200. The only thing I use it for is mowing pastures, so he's not over worked. His engine was rebuilt and there's no problem there, I don't think. After about 1/2 hr. into mowing, I notice a...

Hi. I'm new to the board and have a few quick questions. I'm looking at possibly buying an '86 Kubota B9200 with 60" mower deck. Has anyone on here owned this model before? I've heard good things about it, can you give me any pros or cons? It has fairly low (670) hours and seems to have...

I bought a B9200. Is there any site where I can get the age of the machine. The serial number is just over 50000 if anyone can help. I emailed Kubota but they haven't answered me. It was sold to me as a 92 but I think it is an 87. The tractor is a real bulldog. It helped me grub out a...

I noticed today in my local equipment trader someone has both the B9200 and B2150 for sale. Each for $3900. The B2150 is a hydrostat, the B9200 needs a clutch. No mowing deck on either one, do they have 3 pt and rear PTO? I think I would rather have a rear mowing device anyway. I am realitively...