kubota l3300

Hi everyone , I'm refurbing a l3300 it's fitted with an earlier front axle from a different model and I'm looking for the correct axle if anyone has anything please ? Many thanks

I plan to paint my entire tractor including the body, chassis, front loader and backhoe this spring and as I'm slowly getting closer and closer to the project I wanted to ask you what else should I service while I'm taking parts off the tractor for the paint job. The tractor is 25 years old and...

Guys, I just picked up the Woods 7500 subframe backhoe and need some help installing it on my tractor. The manual only covers the 3pth installation but not the subframe. The backhoe is PTO driven. There is a bracket which is installed at the back of the tractor (see below) but I don't know...

I am trying to track down a complete instrument cluster for my Kubota L3300. or someone who refurbishes them. Thanks!

Need help locating qty (2) rear R4 tires for my Kubota L3300. Dealer says 12.4 x 24 R4 tires to be used in rear with 10 x 16.5 R4 tires in front. Have found front tires and rims. Now need to locate R4 tries for rear. Dealer says I can reuse the original rear rims. Any help in finding a set...

Hello, I'm hoping somebody can steer me in the right direction. hahahee <whew> :o I fired my L2900 GST up and took it about 10 feet when I realized I had no steering to the right. I still had steering to the left. Here are the specific symptoms: turn to the right = massive leak and no wheel...

Plan to try and repair the L3300 front axle leak on my 4x4 model tractor. Looks like lots of stuff on the web about this repair and seems like step 1 is to decide which of the 4 leak paths are the issue. I may lean to replacing everything, 2 lip seal and 2 static seals. My question is if the...

After doing a lot of snow clearing and moving after a big deep snowstorm in March, I was unable to restart my L3301. Played with the HST pedal a bit and it started. Noticed the tractor was creeping a bit as well and the problem happened again. Talked to the dealer and they said to replace...

I am looking at a used 97 L3300gst tractor. Are parts hard to come by? Does the L3300 share parts with a newer model like the L3400? I appreciate hearing from owners who have first hand info on this. Thank you Charlie

Older Model Kubota L3300DT 4wd. Inherited . Motor mostly apart. Have the old parts. Cannot get PTO to disengage. Will go into gear and will roll in neutral . Prairieville, La. E-mail at rivettw@gmail.com for info. Thanks rivettw

I bought a Kubota 3 pt. hitch mounted backhoe for our 1998 L3300 a few years ago. I have removed and installed it 5 or 6 times and every time it takes between 45 min. and an hour for me to do so. Granted I am dealing with a somewhat tight space that I store it in but there has got to be a...

I've been meaning to get a battery for a long time. It turns over slowly and then usually starts. Lately I've had to jump start it. Today I jump started it and let it run for half an hour then shut it off. After a couple hours I went to start it and it clicked and I thought I heard what sounded...

First off, let me introduce myself here. I'm getting ready to purchase a tractor for my new property and I have been looking quite heavily. I have 15 acres with some wet areas so 4wd is a must. I REALLY want a loader, bush hog is a must, and a box blade. That should be enough to get me...

New to me L3300 with 1400 hours. Glow plugs didn't work when I bought it, waiting for parts on that but it has started fine including this morning with a little cranking. Ambient temperature range 50-60. This poor tractor has had the crap beat out of it. I bought it from a gun club and they...

I'm wanting to replace the clutch on my L3300 kubota with loader looking for info on what i have to remove to get to transmisson bolts and is it best to leave loader attached to the engine.

Hi, I have a Kubota L3300 and the hydraulic system pressure seams to be surging. The 3-point oscillates with a heavy load and the pressure line to my front loader valve bounces at the same frequency.

Looking for wheel guards ,seat for L3300 kubota not sure of year model. Queensland - Australia.

All right guys, I need some advice. I was going to buy a new L3200 hst w/fel, but with the jerky 3 point and the money ( they gave me a very good price though at $17,300 w/tax) I am looking at used ones. I found a 1995 L3300 glide shift trans w/335 hrs and fel w/cab. The price seems a little...

I have a Kubota L3300 with front loader, industrial tires, rear blade, backhoe attachment and 500ish hours on the clock. I would like to sell this but not really sure how much to ask. Can anyone help or maybe someone is interested in buying. Thanks for the help. I am located in the area of...

I'm looking at a Kubota L3300 FWA, diesel tractor, glide shift trans., 3 pt. PTO, Sims cab w/attached LA 480 hyd. loader, 362 orig. hrs. What would be a good price for this tractor?

I'm looking at purchasing a used Laurin cab off a 1998 L3300 to go on my L3710 HST. I contacted Laurin Cabs directly, and they would not tell me if it would physically fit my tractor, saying that because the cab is ROPS certified, they could only recommend putting it on the model it was...

Yesterday I used my Kubota L3300 and when I shut it off it sounded like the ignition made a buzzing sound for a few seconds. Today I tried to start the tractor and it started to turn over and then it lost all power. Not even the lights or dash lights come on, nothing. It has a brand new battery...

I can not think of the name of these parts on the 3 point lift. I raised my box blade too high today and broke one of these. Does anyone know the right term for them and where I can find replacements? It will be for a Kubota L3300. The parts are in the red boxes in the pic.

So im looking for a new tractor as i sold my Yanmar 155D today. Now i found a Kubota L3300 cabbed with a 8x8 trassmission. Now im wondering if these modles have any problems with them. The tractor has 1300 hrs on it and it has a LA480 Loader. Now im in canada o the price is a little high in my...

I need a Service Manual for my L 3300. When I engage the 4 wheel drive front axles make a bumping grinding sound and does not pull in 4 wheel drive. Anyone have a similiar problem. The tractor has 1400 hours on it.

I see very manuals on line. I have an owner's manual that came with this tractor for general maintenacne. What do I guy that shows me more of the mechanical stuff. I'd like to change the axle seals. They are leaking pretty bad. I saw some shop manual for 188 bucks. It seemed pretty expensive...

I'm not sure if I have the correct terminolgy when reviewing the parts on the L3300 4x4 front axle. There is oil dripping down to the tire, and it appears to be originating where the axle ends is flanged into a plate. There are four rather large bolts each in the corner of this square flange...

My 4x4 L3300 is about 15 years old. I'm not exactly sure of the year, but it's got about 700 hrs and front axles are leaking. They drip right near the wheel, and now must be leaking more as I've seen the drips occasionally on the tire. Is there anything I can add to the fluid to swell these...

I've been reading and see issues with the L3300 pertaining to the top link bracket. It suggests that they should have a re-inforce bracket. What would this mean and how do I know if I have it? Thanks in advance, moday

My l3300 gst I 1st noticed the clutch pedal was a little harder to push in . Thought something may just be sticking so I continued to use. Now the tractor will not move when under load and barely by itself. I do not smell a burning smell or anything hot when slipping. To get it home when it...

Does anyone have a good used Front axle for sale my center pivots are worn beyond repair.:mad:

Where do I need to look to find the serial number for my Kubota L3300 tractor?

I bought a used Kubota MM belly mower today. I own a L3300 4x4 with FEL, and GST and mid pto. I dont see how in the world to attach the mower deck to anything under the tractor. Is there a mounting kit I must purchase to make this work? The model # on the deck is RC - FZ21 serial # 10480...

I am trying to remove my three point hitch to install a subframe for a backhoe. The pins holding the lift arms to the tractor are impossible to remove. I don't think they have ever been removed before. Any tips or tricks to getting the pins out?? Thanks

I have a small hydraulic leak on my L3300 loader cylinder. I cant find the dipstick to check the hydraulic fluid. I see where the cap is buy theres nothing around it at all, just a cap where you fill it up on the back of the tractor. Is it hidden somewhere else? Is there a certain kind of fluid...

I have read on this site about clam shell design grapples and other type grapples. I have narrowed my selection to either the 56 inch WR Long or 48 inch Millonzi Grapple. What is the main difference in the two designs? I will mainly be using the grapple to clear 10 acres of small to midsize...

Not mine, just figured I'd pass it along. Guy says the engine was stolen! 2000 Kabota L3300 w/ loader

Where can I buy a service manual for my Kubota L3300 tractor? What would be a fair price to pay for one. thanks

Where do you check the hydraulic fluid on a kubota L3300? Thanks

wheres the serial number located on this tractor?:confused:

I need a grill for my kubota L3300. I need the complete asem. The dealer wants $400 for this . anyone know of a salvage yard that might have these parts?

I've got a L3300 thats missing the whole grill asem.. the dealer wants about $400 for all the parts. anybody know of any salvage yards that might have this?

Hi, I have recently installed a FEL on my L3300 and now the 3PL is not working. I have a 3spool DINOIL valve for the FEL and connected the tank hose to the tank port on the hydraulic block as well the return hose to the 3PL on the block. I believe I need to add a PowerBeyond plug of some sort...

I've located a L3300 GST 4wd with 623hrs, it looks good but paint is faded, but tires look good. Dealer says "it just needs a battery". is this a good deal? a good tractor? doen't show any leaks. Can I find history of this tractor using serial number? I sure could use some help. This would be my...

I'm in northern Caiifornia. This weekend I'm going to look at a used Kubota L3300, no front loader or other implements, 1500 engine hours, listed for $5500 OBO. The owner says the machine was used for nursery work and that it was well maintained and that it appears new. They are putting on new...

Was mowing pasture on Saturday (pull type shredder) when I noticed my lift arms were down in spite of the control lever being up. Took off the inspection panel under the seat thinking the linkage might be disconnected but the control arm/shaft appears to be rotating properly all the way up to...

This is my first post. Great to have others of same interest to communicate with. My used L3300 has a leak around the left rear axle and I assume it's the seal. I bought one and thought there was a snap ring holding the axle in that allows it to be pulled out. Instead I found nothing of the sort...

I have located a used L3300 with the following description: KUBOTA L3300, 1790 hours, 4x4, ps, 32hp, shuttle trans, ind tires, loader. $12,500 There is no mention of the model year or the general condition of the tractor. There is a photo (attached). I am in hard straights right now. I have...

i have located a L3300 gst (1995) with approx. 300 hours and includes fel and loads of implements. could someone give me a rundown on this model and any potential problems to look for. i wouuld asume the l3410 is the next generation