kubota l4300dt

I just purchased a 2005 L4300DT. It's sound mechanically, but has quite a bit of rust all the way through on the fenders. I'm looking for suggestions on where to buy aftermarket fenders or possibly original from scrapped tractors. Any help is appreciated. Thanks

One for "They don't make them like they used to" category. My L4300DT is still using the original battery. I purchased the tractor new in May 2001 and the markings on the battery indicate it was installed in 3/2000. That makes it very close to 20 years old. I just took the battery out of...

About 4 years ago I had to replace the battery. What is normally a simple job on other machines I own turned out to be a nightmare in this instance. Access is gained by removing the side panels. This model does not have an automotive type lift up hood. I could get a good grip on the battery, but...

Invariably batteries die and must be replaced. The one on my 2004 Kubota L4300DT died and so I thought replacing it was going to be a snap. I went to remove the old battery and boy was I surprised. Long story short, I wound up removing the grille, front running lights, and a thing called the...

okay guys I have called 2 dealers to ask for a price on my tractor its a l4300dt with the bigger fel l6?? cant remember it and the tractor is up north.the bucket has the chain hooks installed on it tires are filled ag tires hours approx 140.tires are like new.bucket has slight bend on the bottom...

My fenders are rusting away. Is there an alternative source rather going through a dealer?

Hello all - I have a 2003 L4300DT with a LB552 loader that only has 130 hours on her. I bought it new with a 72 inch woods rotary cutter (bushhog) and a 72 inch box blade for 22k. The tractor and equipment have been shed kept, and it is all in very good condition. Wondering what i should...

Dad is wanting to put a backhoe on the aforementioned tractor. The dealer recommended the 750H (was 765H). What can anyone tell us about this combination. It will not be used to dig ponds, canyons, etc, nor will it be used daily. Maybe once a month. Mostly to clean out ditch lines, dig/repair...

I helped a farmer who raises work horses bale some of our hay this weekend. He ran a round baler behind his 160 hp beast and let me run the old Massey Ferguson #9 square baler behind my L4300. This is a pic of Wane checking the bales and making a few adjustments. He actually had me run...

I bought a Pittsburgh Plow 2-14" with auto trip and adjusting lever from Sweet Equipment. I couldn't find anything this small in good shape in northern Maine. The transaction and delivery went without a hitch. Ken Sweet is a gentleman and very knowledgeable. I would buy from him again. I plowed...

Dear friends: would you comment about prices, below. Do these look reasonable. Kubota L4300- +/- $12, 450 (2wd); $14,350 (4wd) 5' rotary cutter- WOODS 60" w/ clutch $975 (basic) 5' rotary cutter- Agri $575 (basic) Do I need to buy the front end "suitcase" weights? (3 for $185; 5 for $300-...

Anyone here using either of these tractors? I'm thinking about getting one in the near future.

I looking to trade my L2500 off for a bigger tractor. The rebates and low interest rates are a huge incentive. The 4300s are the right size and price range, but is it really a good dealer price. The two local dealers are only $230 apart. I have two questions. How are the L4300 and 4310 pricing...

1 more pic with our F-250 also.

Here is a pic of our new tractor. I have 6.2 hours on it. Have used the Kubota for finish mowing, box blading and some loader work. I pulled out a cedar last week that surprised me. The tree left about a 4' x 8' root cavity in the ground about 18" deep in the middle. I put the tractor in...

I received my L4300DT from Goss Tractor yesterday. It's a beautiful rig and I already have a little over 2 hours of seat time on it. I found very little information from actual owners on this new tractor model so I'd be happy to answer any questions anyone might have. The package consists of...

After reading some previous posts by Bill C. of his great experience with Goss Tractor in N. Georgia I decided to give them a try. I called today and bought an L4300DT package with loader, tootbar, lifting eyes, 6' Bush Hog 286, 6' Bush Hog Finishing Mower and a 6' Box Blade at an extremely...