kubota l4350

Looking for advice on seal replacement (lower half) for the left front Bevel Gear case that is leaking. I have the full shop manual but the photo quality sucks. I do have some mechanical background and most tools you would find in a shop. I have included pictures showing were it is leaking...

Proud owner of L4350, Not sure where your suppose to leave the Independent PTO lever when you have the Engagement Lever Turned off? This tractor has and engagement Lever to enable the rear PTO to be LIVE, then, it has a Lever on the Left hand hip side that you Have to disengage or lower to...

Hello everyone. I have a problem with my L4350. The issue with the tractor is it doesn't charge the battery, the "easy checker" dash display doesn't light up, glow plugs do not warm up, fuel and coolant gauges do not work and when I turn the key off it will not shut of. I have to pull the fuel...

Hello, I`m a new member of this forum. I`m looking for part numbers and a source to purchase parts for the left front hub on my L4350 Utility Kubota. I have to replace the part designated as "front axle" due to lug bolt damage beyond repair. Dealers price is around $500. Mainly, I need the part...

I am looking into a used tractor for replacing a bobcat around the farm. I do not have much expierence with Kubota's but have found a good looking 4350 with only 600 hrs on it. It has a shuttle trans, but I do not know what this really means(only have had geared tractors in the past). i will...

I am using a used L4350 for mowing and it has a couple of leaks on the bucket boom. Now the tractor has become hard to steer so I think I need to add some more hydraulic fluid until I can get the leaks fixed. I do not have the service manual - where do I add hydraulic fluid? Is there a dip...

Does anyone know if an LA1002 loader and mounting brackets will bolt up to a L4350. The BF1100 is the appropriate loader but I can't find one. I ran across this loader but didn't know if it will bolt up without fabrication. Ken

I just changed the clutch on my L4350. Since I had most of the hydro fluid out, I decided to change the filter and the rest of the oil, man that seems like a mistake now. After putting the tractor back together, the hydraulic system does not seem to function properly. At first, the loader...

My Pop in law's L4350 was parked for 2 days and then it wouldn't start. Lights on dash were dim, sometimes bright. Starter bench tests just fine. Clutch switch seems fine. Grounded and re grounded ground wire. Not even a click out of the solenoid - Well, every once in a while. Hooked it up to...

My clutch rusted out on my L4350 MDT kubota. I split the tractor, cleaned the rust and had my local kubota deal set my clutch up on their clutch table. Got the tractor back together and everything seemed to be working great, until I tried my brush hog. PTO clutch was totally slipping. If I reved...