kubota l4610

My L4610 won't charge my battery. About 6 months ago the alternator went out and I took my tractor to the local mechanic and he ordered and replaced the alternator. All worked fine for 6 months, then after using my tractor for a couple of hours the other day, I turned it off and tried to start...

oh, man, snapped the right lift arm in two. removed the bolt the that's connected to a plate that's welded to the pin. per instructions (I think) I banged on that plate, and got it to turn (which should have also turned the pin), but alas, the plate broke off from it's weld, and now I'm stuck...

Kubota L4610 HSTC, 3800 hours. Denso 10P085E 447200-7443 compressor, Denso 447300 3611 clutch. My ac clutch dropped out after getting up to temperature. Checked voltage at compressor, 11.2 volts. 12.5 volts at battery. Clutch coil 1.1 Ohms, we may have only disconnected one wire to get...

Looking for a backhoe for our L4610. Budget and market seems to dictate a 3 point backhoe. We're only going to use it for light duty projects. Probably a shallow trench, and maybe some tree planting. We're find a number of Woods BH 7500-1 and a Kubota L4690B. Any concerns, aside from the 3 point...

Anyone know what this might be? L4610 HSTC Our Kubota just started making a popping noise. First thought it might be loose lug nuts, but, don't think so. It does not do it constantly. The noise is fairly loud and it shakes the tractor. My best description might be similar to a 1-1/2" tree limb...

I have a l 4610 with a Denso 3 wire alternator that's not charging. I've got 12.89 volts at the battery and 11.5 volts at both wires plugged into the alternator. The wire feeding back to the battery has 11.8 volts at idle and around 13.2 if i rev it. The alternator light is staying on at idle...

My L4610 (HST) is coming up to it's 800 hour service. Checked around for Super UDT (now it's super udt2) it's now$101.35/5 gallon. I talked to an Amsoil dealer he said their oil works ($38.99/5 gal) that's a huge difference and enticing but is it as good?

I just acquired a l4610 hst cab , the pedal seems way out of adjustment ,you have to push all the way backwards to get any reverse and almost all the way forward to get it to move. the pedal was just flopping around ,so I put new bushings in the mount and pedal and tightened it up, and changed...

Going to look at this Kubota L4610 HST 4x4 Tractor with full cab today. Less than 400 hours. Never considered a cab until I started looking at used tractors. All feedback welcome. Will be cutting 15 acres of horse pasture and miss other farm duties.

So I am trying to determine if the Kubota L2180-1 frame and L2184 snow plow will work on a Kubota L4610 with an LA852 loader. I know the loader arms will have to be removed when using the plow but I don't know if the frame will be to remain on the tractor when the loader arms are back on. I...

I finally got her! 1350hrs - beautiful shape! I just ordered a Construction Attachments 3rd Function Hydraulic Valve kit - soon I'll have the rear tires filled with ballast. Not sure if I want to go with the 'foam' fill or RimGuard...

I will finally be purchasing a tractor this week and I have two to choose from: 2002 kubota L4610 HST with LA852 loader and Woods Groundbreaker 9000 backhoe with manual thumb - 1350hrs - very clean - $20,000 2006 New Holland TC45DA with 16LA loader and New Holland 758C backhoe - 1550hrs - very...

I will finally be purchasing a tractor this week and I have two to choose from: 2002 kubota L4610 HST with LA852 loader and Woods Groundbreaker 9000 backhoe with manual thumb - 1350hrs - very clean - $20,000 2006 New Holland TC45DA with 16LA loader and New Holland 758C backhoe - 1550hrs - very...

I will finally be purchasing a tractor this week and I have two to choose from: 2002 Kubota L4610 HST with LA852 loader and Woods Groundbreaker 9000 backhoe with manual thumb - 1350hrs - very clean - $20,000 2006 New Holland TC45DA with 16LA loader and New Holland 758C backhoe - 1550hrs - very...

Some time back, my generator light started blinking, but the voltage was OK, so we just installed a volt meter. Recently, our air filter dirty, light randomly came on. Filter was OK & we suspected the vacuum switch was faulty, so didn't worry about it. Today we were mowing & the tractor shut off...

Good morning gents first time posting! Great site enjoy reading all your post ok I have a Kubota l4610 that just stared to chatter and pop out of pto with my bush hog running .. Any ideas what I could check to see if it's an adjustment or damage to pto gears .. Kubota dealer wants $1600 to rip...

Gents.... Can I get more power out of my L4610? I don't have any emissions junk to worry about (that I know of?) and I was under the impression that I can't boost my power, but figured I'd ask here because....well.... It's obviously the place to ask :laughing: I'm not expecting this to be...

I want to purchase a used Kubota LA852 Front end loader for my Kubota L4610 HSTC tractor. There was one for sale here a while back. Does anyone have one for sale?

It seems my engine races to a much higher rpm on cold startups than when it was new. Cold starup being around 35 degrees, where we live. It also got to where it might have to turn over several times more when cold, so we started cycling the glow plugs 2 or 3 times when cold so it would fire on...

I'm looking at a 2002 Kubota L4610 with 2880 hours. It looks like the tractor has spent most of it's life outside (faded paint). Here is a link to the tractor. $14,300. If everything checks out what would be a reasonable offer if it is worth it. I have a b2150 right now that I'm selling and...

I posted a few months back with some concern regarding my FEL on my kubota L4610. I never had time to do much work on it then, and now would really like to get it up to 100% There are a couple issues that may or may not be related, and I need some advice here. The front end loader raises and...

Could someone please explain the gst gear shift adjustment procedure to me on a l4610. I want to set this adjustment properly cause I feel there is to much pause on mine between gears. Thanks Sean

My L4610 does nothing when I turn the key over. Occasionally the dash lights come on but starter won't activate. Battery and starter tested good, replaced the ground. When key is turned off a odd buzzing sound comes from ignition. Also, jump starting does nothing to fix/resolve the problem. Any...

I have two questions about my kubota l4610, 1 what type of fluid should I run in the transmission it is a gst tranny I got kubota udt but is kinda pricey, wondering if I can just run standard tractor transmission fluid. Question 2 has anyone added a hydraulic center link to there tractor if...

Can someone please tell me where I can find a rear shell for my 2004 l4610 it has r4 tires on it. I believe the wheel is 16x24 with 4 loop attachment PLE ASE HELP I can't even find it on messicks kubota site.

What's everyone's opinion on running tire chains on the front of a kubota l4610 I know it's bad on smaller tractors but how about bigger ones?

I've been told by several people that kubota sets there lift capacity very low on there buckets and you can turn up the hydraulic pressure to get more lift capacity can someone please give me info on how to do this on a kubota l4610 2004 thanks Sean

I've been looking for a used power rake for sale for a little while now. I see prices all over the place, some are still close to 8k or so and some are down near 3k. It seems like the older bar type power rakes are a lot cheaper, whereas the newer carbide tipped rakes are more, makes sense...

Looking for a kubota L4610 with a loader. I would like around 1000 to 1200 hrs.

I want to take the fel control valve off of my tractor to try to clean/ repair it. When I disconect the supply and return lines (they dont have quick disconects) will it be okay to just leave tehm open until I can reinstall the valve? I will of course be sure to not start the tractor until I...

I recently bought a l4610 with an la852 loader and a bradco 511 backhoe. I have has a few issues with it so far and I am hoping you could provide some advice. 1- the float position does not lock in. I disassembled it and cleaned it, but it is missing one of the 4 smaller ball bearings and I...

I just bought a 2001 l4610 with a backhoe on it. The previous owner lost the 3 point hitch, so now I'm looking for one. Any ideas on where best to find one? Or any other tractors that will interchange the parts?

Just today I bought a kubota l4610 with front end loader and bradco 511 backhoe. We have 41 acres of woods in south jersey and will be building a house so it should be a good investment. The tractor is a 2001 model and only has just under 400hours on it. This is my first tractor an I have a lot...

Some of you are familiar with my tractor, I've posted about it enough on here that's for sure :laughing: Well, (as much as I hate to post this) I'm thinking that it may be time to sell the 'ole girl. I'm curious what it may be worth and what I should ask for it? Do "extra's" add to the...

Don't have the manual. I've searched online, but still haven't found pictures or symbols. Would anyone have a suggestion?

Does anyone know what the dash symbols mean on a 2002 Kubota L4610? Mowing yesterday, and today dead battery. Dead battery light, and the symbol to the right... light bulb symbol?

Hi all, I'm wondering how much of an upgrade an L5740 would be from my current 4610 (39PTO HP and LA852 Loader.) Then on the other hand, I'm wondering how much of an upgrade an M7040 would be from my 4610. The thing I don't like about my 4610 is I need more power, both in lift capacity and...

Just pIcked up a very nice 2002 L4610 Gst with loader and Woods backhoe. Very nice well taken care of machine with 411 hrs. I will be picking your brains often with questions I am sure!

Pto turns when not under a load. As soon as you put it under a load, it makes a noise and stops turning. What's the problem and how hard a job is it to repair?

The pto turns without ant load. Once you put a load, it makes a noise and stops turning. What's the problem and how hard of a job is it?

Can anyone tell me what the "curly looping line" indicator light is?

Hey Guys, Does anyone know if a 6' Harley Rake (Hydraulic) would work on the front of my L4610 with 9.6 gpm flow? I didn't think it would, but I called for a price on a Harley Rake rental and they told me it was a hydraulic version and not PTO powered, I then asked about renting a skid steer...

Hi guys, Unfortunately I'm not home to take more pics of the tractor so I don't have a good one but maybe one of you pros can help me out? I found a set of chains that are the right size for my tractor but I don't know if my tractor either already has spacers or maybe has those 2 piece rims...

What about a L 4610 ? Its a 2001 0r 2002 model , looks ok , needs some TLC , light, seat, tailights, cleaning up. Small dealer is going to fix it up and sell it for more , or sell as is . He is asking $13,500 as is , with factory loader . It also has rear center link and side arm that are...

I really hate to post this question because I've bothered you guys enough with 'buying advice':D but I just have to get your opinions. I looked at a '03 Kubota L4610 with FEL, Landscape rake, boxblade, and quick attach forks. It is 4x4 HST with 500 hrs of use on it, it has been garage kept...

Hi guys, I need your help on a used tractor I'm interested in, but I'm worried the price is a bit high. I was asking about 'what tractor to buy' in this thread http://www.tractorbynet.com/forums/buying-pricing-comparisons/189512-am-i-right-track-what.html and someone had recommended that an...

Hello everyone. I have a L4610 4x4 with the gst trans. I am trying to determine the value. I haven't been able to find one with the GST for sale. Mine has 225 hours on it with the la852 bucket, along with a woods bb700 box blade.

We have a Kubota L4610 HST, cab, 4wd. It has approx. 900 hrs, but does have blow-by. We are looking to move up to a M5040. Would you spend the money to fix the L4610 and trade-in or sell it? Or get rid of it as is?

Have a friend with a L4610 and bought a used 4560 backhoe. Doesn't look like the mounting kit will work with his tractor. Anybody got pictures of this setup? Also, it's marketed as a quick attach, but we can't see how you can use any 3 point hitch equipment with those mounting bars installed...

Hello everybody and thanks in advance for any help. I am in the process of buying some property. And as part of the deal there is a Kubota L4610 HSTC with a cab on it and A/C and heat with a stero included. It only has 240 hours on it and has been well maintained and stored under a barn when...

I have a L4610 with the hydrostatic transmission and a front end loader. While using the tractor over the weekend I noticed a trail of leaking oil. I stopped and looked under the tractor and the hydrualic/tranmission oil was running out of what appears to be a fitting with a small drain hole to...

I recently purchased a Kubota L4610HST with 330 hours on it. Used the tractor for a month and everything was working great so I decided to purchase a new Kubota front end loader. I installed the loader and added almost 1 gallon of super UDT Kubota hydraulic oil to top of the system after running...

My 4610 won't start. I used it 2 weeks ago everything worked ok. Put in a new battery. When I turn the key I get nothing. I tried the emergency flashers and they work. It seems like power is not getting to the key switch. Could it be the timer relay? This would happen now, we just got 6 in of...

I have a Kubota L4610 that has one rear remote on it. Therein lies the problem. I now need another outlet but mine is not stackable so this means its new valve time. Where can I buy ,(afford ably hopefully) a 2 or 3 pair outlet that will fit my 4610? According to my dealer they're unavailable...

Here's the thread that describes what I'm shopping for: http://www.tractorbynet.com/forums/buying-pricing-comparisons/107856-city-boy-shopping-first-tractor.html I saw this L4610 today and for the money it seems like a decent tractor. I drove it and it seemed to run fine, but I don't have...

Newbie here. Great site for info. Hope you can help me. A dealer near here (Traverse City, Mich) has a 2001 L4610HST 4wd on his lot. 4 cylinder, ROPS, R4 tires, the rear ones loaded with dual rear remotes. It also has a 3 pt hitch, a block heater, and a LA852 Q/A loader w/ a 72" bucket...

I went out to start my tractor today and it wouldn't start. When I turned on the key the lights on the dash came on for a second then shut off. When I turned the key I got nothing. When I turned the key off, I got a buzzing noise. Now when I turn the key on I don't get anything. The battery is...

hi ppl.! can u put industrial tires ,r4 on r1 rims? if yes could i put ind. tires on the front and get the rear 1s later? k! thank you in advance!

For the first time my L4610 has been hard to start. When this happened my first instinct was to find the choke and use it. I can't find it so I'm assuming that it must have an automatic choke. I've had it serviced regularly by a kubota dealer. Any thoughts on why it is getting hard to start?

For those looking at the new L3130-L5030, you might want to check out <font color="blue">this</font> L4610 HST W/ R4's and an LA852 FEL. If I hadn't just bought an L3130 for a lot more, I'd be bidding on this one. In fact, I do believe it's giving me a serious case of post purchase blues.

We did it. Did our 10 acres of hay with the L4610. Cut the hay with an old JD 480 mower conditioner, raked it with a wheel rake and baled with a NH 320 w/kicker. I did not think the Kubota had enough power to pull the baler and a hay wagon but had no problem even pulling with a full load of hay...

This is a L4610 with about 600 hours, that was skidding out some logs using a 3-pt hitch skidding winch. The 3-pt ram housing broke off taking the back of the main gear housing with it. This happened in past couple days - don't have complete information yet. This machine also has a Kubota...

I've lost my manual for my tractor. I want to get a hydraulic port selector to put on my power beyond port. Is that port a 1/2" or 3/4" port? Thanks for the help!

I finally got to do some of the fixes 5030's shared with us to get my A/C to cool better. (Thanks 5030) I did everything but install the wog valve. It still does not cool during the hotter part of the day (midday). And when the cooling goes, the temp gage starts showing that my tractor is over...

Earliler this week I had a 3 PH but now only a 2 1/2 PH (see attachment) I was using the FEL to move some sand and had the box blade attached for rear weight to stabilize the FEL action. Toward the end of the day my a$$ was dragging and so was the tractor's. Note how the weld beads contoured...

I have a fel L4610HSTC with a grapple bucket. Best thing I ever had. It has been great cleaning up our new property. Can work all day long doing loader work with no problems. But as soon as I start clipping with the Woods 6000 5'er or disking with the 5' disk the temp starts up. The temp gauge...

Thanks SageBrush, Grandad and the others that first replied. I have a fel on my tractor with a grapple bucket. Best thing I ever had. It has been great cleaning up our new property. Can work all day long doing loader work with no problems. But as soon as I start clipping with the Woods 6000...

I wanted to ask if anyone is haveing any problems with your tractor running hot. I don’t have any problems when using the loader but when I use my Wood (6000) rotary cutter or my Tufline (disk harrow I have to really nurse it through the jobs to keep it from over heating. It is of course a...

There are anti-sway (lateral control and positioning) things beside each of the lower arms of the 3PH. There are pins on keeper chains to place in joles or slots to adjust the position of the implement on the 3PH. They do not carry weight but do take side to side loads. I have had bolts...

All, Sad circumstances require me to sell my Kubota L4610 HST purchased new in July 2001. I have 103 hours on it. Condition is excellent. Add-ons include FEL, Norse ice chains for the rear, one remote with hydraulic cylinder for the toplink. Implements include 84" RD8400 Woods 3-point...

So I say to the dealer,"What happens if I only put one or two of the maximum number of weights (3 per wheel) on and then drive at max speed on the road?" "Will it bounce up and down from the imballance?" They tell me probably not as the weights are too close to the axle and don't generate much...

This Kubota owner had enough removing snow w/fel,and had a new blower install on his L4610. He got the limb riser setup idea from a fellow TBNer..Woody..not sure who gentleman is,but he does in at TBN every now and than.

Since the weather's turned colder, my L4610 has started differently, and I'm feeling a little new owner paranoia. When starting in colder weather (below 20 degrees), I noticed that I get more smoke during the first 15-20 seconds of run time. I've assumed this was normal as most diesels I've...

I have never been really happy with my A/C and have complained to the dealer many times. Now I know where all the screens and filters are that can reduce refrigeration effect. Still, I don't get enough cooling and it squeaks a lot at idle and sometime squalls loudly for long periods except at...

When I was doing some loader work recently (spreading a 10 wheeler load of topsoil), I noted that I was really squatting my front tires down. This was particularly true with the second load, which was wetter than the first. The loader had no trouble lifting even the bucket loads absolutely...

I may be getting into the commercial backhoe business, if I do I will be getting a Kubota L48 TLB. Before I do that I will sell the Kubota L4610 that I bought new in June 2001. It has the Kubota loader, HST, two remotes, and a TNT kit. I realize that I have to price my own equipment and that in...

Finally, after beating on every Kubota contact I got a reply and can now reveal the mystery of why Kubota prohibits liquid ballast in the L4610 with CAB. This was already guessed/proposed by some TBN denizens. It is a strength issue with regard to the ROPS capability of the CAB. Sure, there...

Well, after many months of research (much of it at TBN), comparison, etc, I finally swallowed hard and bought an L4610. It was delivered today. They forgot to install the block heater and are going to replace one decal (it wasn't installed properly and they warned me before delivery--I would...

On my L4610 I've got a grapple bucket which is operated by a remote valve which is located in one slot of the three slots on the right side between the seat and the fender (the other two slots are empty). I believe this remote might be a factory installed remote instead of a dealer installed...

I'm preparing to buy a JD 4710 with FEL or Kubota L4610 with FEL. Price will partly determine which one I buy. However, I'd like any advice from someone who has comparison shopped for both tractors. Also, I'd like some advice on whether calcium in the tires is a good idea or wheel weights a...

My husband just bought a new Kubota L4610 front loader. And the very first time he used it, less than half full with dirt, very slight incline, the back wheels lifted right off the ground! He is extremely discouraged and does not know what to do. We read about ballusts and reversing wheels...

I am trying to clean the hst strainer for the first time. Is there a way to get the strainer out from behind the spring tensioning bar that brings the hst pedal back to the neutral position when you take your foot off the pedal? It seems very close to coming out, but won't. I am thinking I will...

After much investigation, studying, reading, changing my mind, and a lot of fun just dreaming, I THINK I've finally made up my mind that I'm going with an L4610 and bradco backhoe instead of the L35 or L48. It seems to fit in between the two for general purpose use and fits my budget. So here's...

I've been comparing tractors for quite a while. I'm looking for a good all-around utility tractor to clear dead and live trees, pull/dig stumps, mow, do general landscaping, put in a long driveway, clear snow, etc. on 35 acres that are at 7400 ft elevation in Colorado. I definitely want to get a...

HAVE BEEN FOLLOWING THIS BOARD TRYING TO MAKE A DECISION ON BUYING A KUBOTA TRACTOR. APPRECIATE THE BOARDS IMPUT ON PRICE CONSIDERING L4610 HST WITH R4 TIRES AND A LA852 FEL BEST PRICE I HAVE FOUND IN MY AREA IS $22,382.00. THIS INCLUDES THE $1400.00 DISCOUNT FROM KUBOTA. WHAT ARE YOUR OPINIONS...

Blurrybill, got your e-mail, sorry I was on my way out of town. If you want to put on the XM27' you will have to do work on your loader frame and it won't be fun! see photos

Well, you know what one or two days of thinking about a tractor purchase will do to you . Big enough, not big enough, will I be sick because I didn't get what I need, will the wife kill me because I nixed her HST . Anyway, I kept thinking that $28,950.00 wasn't much difference from what a...

Well TBN, I posted around Dec or so a price on a new TC45D that was around $22, 900 with a whole bunch of goodies on it. When I went to buy this tractor the price had amazingly went up to $25, 250.00 . Dealer said it was a mistake and the price he quoted was wrong. So, seeing how it wasn't...

What size XM27 tires/ wheels will work with an L4610 with loader (I assume I will have to modify the loader frame as previously illustrated on TBN)? Where does one go about sourcing these critters? Any idea on a decent price for wheels/ tires? Thanks, Evan Johnson in SC

I recently had the pleasure of driving both machines and WOW was I ever impressed. I can say that the New Holland 45D has the best steering and ergonomics of the two tractors but the Kubota has the best Hydro system, it is hands down better than the NH. I am in the position to buy one but have...

I recently had the pleasure of driving both machines and WOW was I ever impressed. I can say that the New Holland 45D has the best steering and ergonomics of the two tractors but the Kubota has the best Hydro system, it is hands down better than the NH. I am in the position to buy one but have...

My dreaming continues.... Bradco gives their stamp of approval for either a 511 or a 609 hoe on an L4610. They do not support the 611 and will not stand behind it so if I used a 611 I'd be on my own from a warranty stand point. Given this, would you pick the lower powered, but deeper digging...

I bought 57 acres last year in Northern Arkansas, 20 miles from the Missouri border, along with a '83 Case 480D 2wd backhoe and other farm equipment that included an Allis Chalmers propane tractor. The backhoe gets used about 40 hours a week clearing and digging as only 30 acres of the land was...

I have decided to go compact instead of utility. But now I'm stuck between brands, and I have a few questions. Between the 4610 and the 4700 which is the more heavy duty one/bigger tractor? Which is most stable on uneven ground and hills? Is the Kubota loader as simple as a John Deere loader...

Assuming one wants a loader and backhoe, which I do, then why should I want an L4610 over an L48? The L48 has more HP, more hydraulic flow, more loader lift, more BH power, and still has a 3PH for all the 3PH stuff, which by the way has more lift capacity. The loader, BH, and 3PH lift numbers...

Warning the following post may contain graphic details not suitable for some readers. I originally thought my new L4610 was house broken as there were no major accidents on the living room floor with the one exception, air conditioner condensate dripping but its only distilled water and it...

My Firestone Industrials are so new (how new are they?) They are so new that the little rubber thingies that bristle on new tires are still there, even on the tread (57 hrs). The left rear is punctured near the center of the tread pattern but not through a lug, between lugs. It could have been...

Friday my local dealer delivered an L4610hst with LA 852 loader, loaded ag tires, and a Bush hog SQ720 rotary cutter. He didn't give my any time limits, but he knows that it is likely that he won't have to come back and get it. If I keep this tractor, he will put a block heater on it before...

I am currently waiting to hear back from the dealer re: availabilty of anL4610hst in Northern Vermont. He has come up with a pretty solid deal, but doesn't have any in stock. He is only 8 miles from the farm and has worked with several members of the wife's family that farm full time. He has...

I'm shopping for my first tractor and this site has been really helpful in fiquring out that I want to buy a Kubota. Thanks for all the posts that aid us novices in making a good decision. I think I want an L4610 HST but have a few questions about its capabilities. First, is it suitable for...

I'm in the market for a new tractor. Currently have a MF 240 rated at 45PTO. My tractor has the old fashioned gear shift (no shuttle shift) or I'd put a loader on it. Also the MF MFD turning radius is too big which leads me to Kubota. This is where I get confused with the "L" series and the...

A couple of you have said that the Landpride boxscraper I have been looking at (BB2572-478pounds) would be O.K. for my L4610 that will be delivered soon. It is in the price range that I like, but is low in weight compared to some others and is also rated for under 40hp. I plan to use mainly...

I will be ordering my L4610 on monday(can't wait!!!) and the dealer recommends rimguard for the R1 rear tires(adds about 1000#'s). Should I add ballast in front tires? Also, the Landpride 72"Box Scraper the dealer has weighs around 500#'s, is this to much weight to rear when FEL is empty and...

L 2600 DT, L 48 TLB, L4610 HST, Ms L 2600 DT, L 48 TLB, L4610 HST, Ms series.. don't snooze.. Only 2 or 3 (each) overstock sale down .. March marketing leaders are posted at...http://www.carverequipment.com/cool_season_new.htm

I've lurked or quite a while and have come to respect and appreciate the members of this forum. Hear's my question. I can afford an L3010 with a 4n1, hydraulic box blade, and heavy duty mower. Or I could scale back the attachments and get the L4610. I have 40 acres in the Texas hill country...

We are about to purchase either a TC45, JD 4700, or Kubota L4610 with loader, backhoe, 4wd, either turf or R-4 tires. One NH dealer recommends Supersteer, another doesn't. Same with turf tires. We've listened to dealers and read their literature. Now I'm asking real owners. Why one over the...

Well heres photos of the finshed product. Now I won't be quite so concerned when I go into the woods. All those hyd. lines and that BIG HST FILTER, it just won't do to put a stick in to one! Rich

Well after 5 hrs. of operation I would like to thank every one on this board that pushes the HST trans.!! The diff. [once you get the hang of it] beteewn it and any other type is just amazing. I had a new GST and sent it back [have a good guy for a dealer] and order a HST. Its so fast and handy...

WELL the dealer show up this evening with the L4610 HYD leak and all. I had them put on 2 remotes and got the leak free, he drove 65 miles to deliver got here and tunred around and went back. What a bummer for both of us. Oh well he'll be back on WEN. now. This is after he got sick on mon. and...

Re: buying new L4610 vs L4310 Thanks for all the input. I had to wonder about the R4 with mud, and I think Gordon must be right. I have never used them. Now MCalkley has got me wondering about these Michelin's.What ply rating are they? IM worried about STUMPS. I went to their web page but could...

Ok I tryed this once before be Im sure my comp ate my post?? Have a ford 1910 with loader and ag tires. Looking at L4610 or L4310 to up grade, need more HP. Read last post about loader's and had been leaning to L4610, now Im sold. So thats that. L4610 it is. I skid alot of wood ie. long logs...