kubota l4740

Kubota L4740 with BH90 backhoe and sub-frame. 18 in bucket. 72 inch bucket front end loader with quick change option. Also 60 inch box blade with new 3 point attach kit. 1785 hours. Stumps are out so time to move along to the next project.

Some of the bolts attaching the engine to the frame on my Kubota have stripped out I would like to use a locking threaded insert instead of a HeliCoil They come thin and thick walled Has anyone done a similar repair and did you use thick or thin walled inserts?

Anyone have experience replacing the crankshaft seal? Kubota L4740, but I'm guessing other models are similar. I've searched around here and online and can't find much info. I'm guessing it's just a matter of taking all the front stuff off, including radiator, pulling the pully, and swapping the...

Recently sold the L3710 and got a low-hours L4740. I love it - that extra 10 hp makes such a difference. It had 365 hrs on it when I bought it and I've put about 75 more on it. It's making a sound that has me a bit scared. When I first got it, I thought it sounded like it had a knock. The guy...

Hey everyone, I need some help. I am trying to run a hydraulically driven motor like a bush hog on my l4740. Now I know I can get the pressure from my rear remotes or third function but the return line needs to go to sump. I do not like the idea of running the hose into the fill port for it will...

Here is a run down of what is going on. tractor is new to me since february. no problems when running the snowblower. I checked hydraulic pressure at the rear remotes when I bought it and I seem to remember it being on the low end of the spec but not out of spec. It was cold when I tested it...

Kubota L4740 PTO will not shut off, tractor has 170 hrs, I split tractor to remove PTO clutch pack, clutch disc and steel plates welded together, clutch pack shows heat present. Replaced clutch pack,seals gaskets,filters and fluid. Kubota repair manual describe's checking and adjusting Pressure...

I have a kubota L4740 with 3000 hours and I am looking at buying a backhoe attachment BH92. I question is my tractor to old to be investing $12000 into an attachment. Question number 2 is what is the performance like. I heard conflicting stories. Could anybody shed some light on this.

I found a kubota L4740GST 4wd with loader and 255 hrs for $17K. Is this a good tractor and is this a good price? Thank You

I have a L4740 HST, the pto is turn on and off by an electric switch, today the PTO will not shut off, it keeps running with switch on (PTO indicator on dash on) or switch off,(PTO Indicator on dash off) pto still runs. If clutch is pushed in it will stop. Any on run into this?

I just got my tractor back had the third function valve installed and I just bought a sweet plow

Hi there newbie looking at a 2011 kubota l4740 cab tractor about 200 hrs guy asking 28000 I was thinking this was not bad with bucket no warranty what do you guys think, I like this tractor a lot last of the tier 3 I understand this tractor is a beast and with the goodies should last a good long...

I have a newer Kubota L4740 HST 3 that has trouble lifting the 3 point with a heavy bale. I have the knob under the seat set as high as i can get it and run the motor at full throttle. I can not find where to adjust the pressure. the HST 3 is different from my older HST. Can anyone help on...

2009 L4740 hst cab tractor. Not so much power, noticed when plowing snow. Would not come up the hill as it had since I got it? All new filters still the same.Checked TBN some brake issues noted. Checked the tractor on a hill in neutral, it would roll but not freely??? Jacked up the rear end (in...

Hi there - What length trailer is recommended / required for a Kubota L4740 with a Front End Loader and Backhoe? I have a 16' + 2' dovetail trailer nearby that's for sale but according to my measurements it may be a bit short. Anyone have any advice? Thanks.

Hello. Log time reader with little need to post but now face a decision. We have purchased a new place with 40 acres and the possibility to add another 40 or so. The land is mostly level and clear. However there are about 8.5 acres of woods I would like to clear. Other tasks I will need to...

I'm looking to purchase a rubber cuttung edge for my 84" plow, I have a gravel parking lot and a 1/2 mile of uneaven blacktop road (Worn from truck traffic) I'm thinking rubber will have more "give" Has anyone used the rubber cutting edge from Kubota, How did it work?

Purchased a air filter for the L4740, it doesn't fit. I did alot of checking with a few Kubota dealers and very few (only one solved this problem) the L4740 tier III takes a special air filter, dealer cost is $80.00. Most Kubota dealers said there is only one filter for this tractor. Messick's...

I am new here, tried searching this several different phrases, no help. I have the opportunity to buy a 8ft back blade for under $200, as far as I can tell from different website they recommend at most a 7ft blade, will the extra foot make a difference when plowing snow in the winter? I know my...

My tractor is showing Error Code 87. Everything seems to be working fine. Anyone know what this code is? Thanks.

So I have owned several tractors over the years all gear driven. The latests were a Massey with shuttle shift 16 x 16 and a Kubota L4330 Gst. I do a lot of snow removal so this year I decided to step up and buy a cab model. To my dismay they dealer told me no Gst in the cab version. So with...

I know there has been much talk about tire ballast, but I have not seen ay discussions on Caliber M-1000. The reason I put this out is because when I purchased my tractor I thought that the dealer was using rim guard. I did not even consider to ask because I have bought mutiple tractors from...

Just purchased a new l4740 hstc and the machine idles at 800 rpm which seems kind of high to me. If my failing memory serves me well I think my L4330 GST idled at around 400 -500 rpms. Any input would be great. Thanks. Mike

I expect that the type of tire makes a difference in overall height but I am not sure I can find specs that state the difference for each tire. I have a L3400 with R4s - no cab. Trying to find out how much more height a L4740 would be with a cab but with R1s. Listed specs on the website say...

Hi, I have a Kubota L4740 and am looking to buy a rear blade for it. My dealer offered me a 7 feet Buhler series 60 at 405 lbs. I was looking at the 80s series at 939 lbs. Anyone can give me advice out there with this? I am afraid that the series 60 blade would be too light for my tractor...

I am looking for a L4740. What should the basic tractor cost with Industrial tires? How much for the Kubota Loader LA854? How much for the Loader with the Skid Steer easy attach option? How much for two (2) optional hydraulic valves?

Greetings I have been lurking around the forums here for a bit now reading all of the great information from the other contributors to the site. There is certainly a vast wealth of knowledge on the site. I am looking to acquire a compact tractor for use with a pull type snowblower for a...

Well, it was finally delivered last Friday. I've been so busy doing other things that I have only put 8 hours on it so far but I can honestly say that I am quite impressed. This new HST-plus is pretty neat for running up and down my slopes and it has enough power to pull the 6 foot Bush Hog -...