kubota l4760

A little fun in the snow this week Kubota L4760 Bigtoolrack and HLA Plow.. Snow storm video link great scenery

Loader is 6’ for comparison. Thoughts on a 7’ blade on the back of this size of tractor. 🚜

I would love nothing more than to order the kit from Brian but having a 9 month wait is killing it for me. Just have too much grading to do and don’t want to be stuck manually doing all that work for the next 9 months. With that how does this look? One thing not sure about is if the flow...

Can anyone tell me where the valve is on a L4760 grand w/cab that you shim for hydraulic pressure increase? I think I have found it but would just like to make sure.

I have a Kubota L4760, I recently removed snowblower for the summer and attached front end loader the bucket operates normal but loader only lifts about 1/2 way.

Hello . I have a 2013 Kubota 4760 it has only 120 hours on it. I am having some problems with it. The tractor does not get lots of use and sits for some times over a month or more without running. I found that the radio draws the battery down so I take the battery cables off at the battery to...

I've noticed very little discussion on the tractor forums about the new Yanmar YT347/359 tractors so I wanted to get y'alls opinion about how this tractor stacks up against Kubota and Deere, specifically the Kubota Grand L4760. But first, let me tell you a story about my past experiences with...

I have a 2014 L4760 that apparently has a factory recall for a "breather" issue. Unfortunately the dealer never seems to get back on a time for them to come do the work. Is anybody familiar with the issue and is it important enough to go to corporate about it? Thanks.

Recently purchased Kubota L4760 with loader and BH92 hoe. Approximately three days the stabilizer are 10 inches off the garage floor. I left the dipper unlatched and it was just about to rest on the truck. This leak down normal for Kubota?? I had purchased a smaller Kubota and had the same...

I was told by Paul Short to ask my question on this Web. site, he runs the Specialty Repairs in Bay Roberts, Newfoundland and Labrador, Canada. and I must say that he has made me smile with the talent that he has, in how he customizes his Kubota or just anything. I was wondering if a 976 lb...