kubota m4950

Hi Guys-- My tractor buddy has a cracked head on his Kubota M4950 DT 6 cylinder. Having a bit of trouble locating one. Any ideas? We are in Canada, but willing to explore possibilities. Cheers.

Hey guys, i got a m4950 at auction and it is missing the PTO drive shaft and most of the components that attach to it. How can I tell that the drive shaft coming from the engine works (circled in red in the first pic)? Is it ok to crank the engine over and see if it turns? Obviously the PTO...

Hey I got a M4950 and can't get the PTO to engage. The handle will go from N to Live PTO when I pull up the clutch but the pto shaft won't start turning. It turns fine by hand with the tractor off and also doesn't lock in if I put the pto lever from N to Live. There's no grinding noises or...

Hi helpers, I am getting oil in radiator and overheating very quickly under load. No coolant in oil. I figure head gasket or cracked head but have been told oil coolers can leak oil into radiator. Does anyone know if this model had an oil cooler? There is not one obviously on side of block...

i have a kubota M4950DT that i feel is little weak for a 50hp tractor and im looking to turn it up a little. i read that you can increase the rack travel on the injector pump by letting out a screw. id like to try that but it looks like there are two screw that i could adjust on the injector...

Bought the m4950 doa, rebuilt the engine, fired it up prior to engine reman 3 point worked fine if I recall but maybe not. I just dont remember since it was torn down for about 8 weeks. I lost hydro oil durring disasembly, refilled with tractor supply hydro & tranny oil and no 3 point action...

I recently received an auction advertisement that includes a Kubota M4950 DT 4WD 49HP with a FEL and a box blade. I took at look at the tractor this weekend and it has 4076 hours on it. I found very little rust on it and no indication of leaks. It appears that if was recently painted and it...