kubota mx5200

Got tired of the slipperiness of the bare steel floor on my MX5200, so decided to make a floor mat from it. I got a 3'x4' by 3/4" mat from Tractor Supply, and used a cardboard template and then an oscillating tool and router with spiral upcut bit to fit it. Here are the results:

After recent issues with a Case IH 70a MFD I am considering buying a mx5200 or the new mx5400 with a gear transmission. My only concern is if this will be large enough. Especially since I will be coming from a tractor that is more the size of an M series Kubota. My primary task consist of...

I put 8 quarts in and it is at the top of the dipstick full level. My manual says it holds 10 quarts. I changed the filter also. This has to be a typo in the manual. What are your experiences with the 5200 or the 5800?

Hello All, Love the site! Been lurking on the site for a while and have learned quite a bit but still plenty to learn for sure! I'm considering purchasing my first tractor and believe it will be an MX5200 HST 4wd with FEL. Working with the dealer on pricing and right now we're at $31,525 for...

Hi all, Long time lurker and first time poster here. I am looking forward to contributing to this forum as well. I am in the Virginia area and trying to obtain quotes for the MX5200HST and wanted to get some input in regards to whether or not these numbers look reasonable. I would be willing...

Here are a few photos of what I did the first day operating my new Kubota MX5200. When my wife saw it she said it looked like a toy!

Need some advice. Appreciate everyone's opinion. I am about to buy a new tractor for food plots and general land maintenance. I have it narrowed down to the New Holland Boomer 50 and the Kubota MX 5200 (may even consider the 5800). Can anyone give me their opinion on which one I should lean...

I'm not 100% sure how to word this question so that it makes sense.....but here goes. I recently purchased a new MX5200 and I really like the performance of the tractor so for. I just rolled over the 100 hour mark. I noticed from day one that shortly after starting the engine.....maybe a minute...

What did you guys pay for your MX5200 HST 4x4? I'm at $36,100 with the following: -L1065 Loader with 3rd function -72" heavy duty bucket with bolt on cutting edge -3 welded hooks onto bucket -dual rear remotes -loaded tires -block heater -front and rear LED lights on separate switches Thank you!

I've been doing some real looking at a compact utility tractor to use for our new property that we are moving into and some hunting property we have as well. We have Massey, Mahindra, Kubota, John Deere, and International dealers close by. Already ruled out JD and International just on price...

Hi all. I'm buying my first tractor (a Kubota MX5200) and my first grading scraper. In short, I've got 2 options at present: a Land Pride GS1572 (GS15 Series Grading Scrapers | Land Pride) and a Land Pride GS2572 (GS25 Series Grading Scrapers | Land Pride). I've got about 2000 feet of (currently...

These two tractors seem right-sized for my new property. I would add SSQA, front loader, and grapple. No backhoe as I have a small backhoe on my Massey SCUT I could use in a pinch. Maybe a Wallenstein skidding winch but I'm still evaluating that. Neither are inexpensive, but I'm grappling with...

I'm back to considering all three of these machines. I have a thread about big differences in hydraulic capabilities (primarily loader). Now I'm seeing another big discrepancy between these machines in regards to turning radius. All machines are 4wd and HST. Here's what I'm looking at on...

First, let me thank all the forum members who have shared their time and expertise on the forum. Since joining, I've read many posts and have learned a great deal. After quite a bit of research, I've decided on a Kubota MX5200, 4 wheel drive, HST, R4 tires, with a front end loader. I'm located...

I have a new MX 5200 and have about 5 hrs on it. Seems to make a loud growling noise when I put pressure on the transmission. Is this normal and is their a proper way to break in a new engine. I was told by the dealer to just use it. Thanks grc

I've been looking at the mx 5200. could any one give me some feed back on the pro's and cons of this tractor? I will be using this tractor with a front end loader and a skidding winch for working in the woods.

Hello everyone, I have decided to sell my ford 1920 tractor. I am quite fond of this teactor but I have a need for more loader capacity and would like both hydraulic remotes and a Third function valve. I have looked at the following factors, Jd 4044m Mf1742 Kubota mx5200 I have no brand...

Hi All, I am a new member here but have been looking from time to time. I am selling my beloved 2008 2620 as we purchased 22 acres and have quite a bit of tree and brush clearing to do. Anyway, I wanted to get some opinions on price for a new MX4700 and MX5200. I have a couple quotes at 29,200...

I am currently in the market for a new tractor to replace the JD2150 I just sold. I am looking at a John Deere 5055E (4 wheel dirve) w/ FEL and a Kubota MX5100 4 wheel drive with FEL Kubota is about $4000 cheaper but I never had a Kubota and don't know if i would be satisified. I have had JD's...