long 2610

Wondering if anyone could send me a free copy of the operator manual for long 2610? I am new to this tractor. Thanks

The Long 2610 came with Cat I and Cat II capabilities and I understand I need to turnt he lower link arms around for Category II. BUT, my woods backhoe top link is too large to fit in the small top link receiver on the tractor. It has the four holes and small depth, whereas the backhoe has...

Have a long 2610 block at a machine shop getting new cylinder liners installed. the liner OD is 106mm. as are all the liners I have found for that engine. after removing the original liners, the machinist says the new ones measure .009" inteference which seems high for cast block. anyone have a...

Hi, I am new here. I am trying to get some information on a Long 2610 tractor.

I've inherited a Long 2610 tractor built in the 90's. It's got a Bush Hog 2400 QT front end loader on it, and it works well ... but ONLY when the 3 point hitch control is held in the "move down" position. It appears to have been this way for a long time; my dad had that 3 point control lever...

Had the splines on one side of the cross shaft strip out... Ive located a cross shaft, has anyone replaced one of these before and what all is involved?

I recently bought a Long 2610 tractor that had been sitting for about three years. Changed all the fluids and replaced a couple of hoses. The biggest problem I have it that it blows black oil and gray smoke from the crankcase breather tube. I'm very concerned that I will have to go into the...

I'm short one manual and kinda need this in a relative hurry: my boss's Long 2610 is snapping some wheel bolts,and we need to find out if anybody's got an actual torque spec for these lug bolts: The rears are 14mm x 1.5, the fronts are 12mm x 1.5.. Rears seem to all be grade 10.9, the fronts...

I am getting ready to pull the trigger on this tractor it has a long brand front end loader and is in really good shape....It only has 1150 hours on it...What are your opinions on this they are asking $7800.00........Need to know soon....Thanks

I just bought a 1994 Long 2610 and had to change the fuel filter after the lower filter was found to be stopped up. During the removal process I dropped and broke the glass bowl, which is attached to the bottom of the lower filter. After several hours of looking for a new bowl, I finally...