long

Just wondering what everyone (that has the heaters) uses for a time to energize the heater on a glow cycle? Yesterday I needed to use 2 tractors it was 30 degs. One started easily after a 10 sec glow. The other tractor which has the newer model engine, but has been sitting for a month, had a...

Getting ready to install a WR Long 3rd function kit on a Powerstar 75. The hydraulic portion of it is simple enough. The electrical instructions are not as detailed. I plan to use the existing buttons on the joystick to work the 3rd function, so i purchased the WR Long kit type for that plan...

I bought a used 2001 long landtrac 530, I am trying to find manuals on it as well as determine the type of Mitsubishi 3.3 liter 4 cylinder diesel that is it, currently for the purpose of figuring out which freeze plug hole I would be able to install a block heater in. Also I am not sure the...

I currently own 3 tractors that are used to maintain property I own. Kubota Mx5100, Mahindra 5530, and a JD 5420. All pre emission engines. Kubota and Deere both have loaders. Mahindra does not. I can say without a doubt, the Kubota is one tough SOB. After Hurricane Michael I asked that Kubota...

Bruce

Decided to become a member to share my experiences with my TYM t654 bought in 2017 now has over 1700 hours Mostly good,some bad I live in Georgia Farm mostly hay (square bales)

Just replaced seals and bearings in a Long 1504 Tiller so I can sell. How much gear oil and type does it use/hold??

Curious what you all do to be prepared for a long term power outage due to weather, grid damaged by whatever. I've been telling may family to be prepared in the even of a sustained outage (longer than a month or two). I don't feel sufficiently prepared for an outage that long, and I know my...

How long you think it will be before I am forced to replace these turf tires + wheels on an old JD750? Badly cracked, but poly/rubber filled. They won't wear out in my lifetime - it will see very low hours, so would love to avoid the $$$$$$$. What would you think would happen that will...

Had a somewhat serious discussion with the wife about selling our home to downsize in the future. This will be a major pain in the butt process. Wife is looking at retiring in the next 5 years or so, and that is when we no longer want to be in our current home. Me, I just love to work and will...

Is there such a thing as a long JIC Tee like the long 90° Tee linked too here? https://www.surpluscenter.com/Hydraulics/Hydraulic-Adapters-Fittings/JIC-to-SAE-O-ring/JIC-Male-to-SAE-Male---Right-Angle-Extra-Long/JIC-6-Male-x-SAE-6-Male-90-Degree-Elbow-6801-LL-06-06-Adapter-9-6801-LL-6-6.axd

Anyone have the wr long rbg3 grapple? Any thoughts on the more exposed cylinders and hoses? Trying to decide between thst and the stinger grapple. Thoughts on single vs dual lid? https://www.wrlonginc.com/rbg3 https://www.echoeqpt.com/product/56-stinger-compact-clam-grapple-ccg

I have a Long 610. It’s leaking engine oil between engine and bell housing on the left side. A lot! Up high. There was a past post about this with no results written. Any help would be appreciated. I assume it’s an oil gallery plug. I plan on splitting the tractor soon. Thanks

Finally finished, barely fit even with their smallest option the Single BOGL, will test it in a bit Used a diverter kit from Artilian.

Does anyone have access to a Long 560 owners manual?

I have a Long 560 tractor with a hydraulic leak from the transmission case. The drain plug and two holes in line with the axles and drain plug are on the bottom side of the case. One hole is plugged with a bolt and jam nut. The other hole is wide open and the parts manual does not show anything...

I have a Long 2460 tractor and the PTO grinds when I try to engage it in either syncro or independent. I do have the PTO clutch rod lifted when trying to engage it. I have adjusted it until it hits the clutch lever on the side of the tranny. The PTO clutch lever is bent slightly down. I am not...

Hello, I have a Long 2460DTC 4x4 tractor. My late father in law owned it before me. Sometime in its life the alternator was replaced with a standard old school chevy alternator from a late 80's Camaro or similar. It has a built in voltage regulator from what I can tell. The factory regulator is...