mahindra 3316

The Mitsubishi diesel in the 3316 HST Turbo seized up at 500 hours. The tractor has been sitting at the dealer for nine months and they claim to be unable to get parts from Mahindra to rebuild the motor. Has anyone had any experience with a motor malfunctioning with such low hours? Can anyone...

Hey, guys. I need to clear a bunch of slash piles and brush off of a 1200 foot fence line. Sounds like I need a root grapple. I've been lurking here for several days and perusing the threads about installing 3rd Function Valves. The dealer quoted me $1400 for the valve and installation. I...

My front axle is making a loud squeaking sound so I rose the wheels off the ground to see where it was coming from . It is coming from the front pivot and bracket that is bolted to the chassis . I can't see any grease fitting or place to grease it . Looking at the parts online it looks like...

Starts but loses power then cuts out; at first would run 20-30 min before losing power; is not overheating; replaced fuel pump and filter; no sign of water/coolant in oil, no bubbles in coolant, no moisture coming out of exhaust; tried removing fuel cap to make sure it was venting; tried...

The fan has about 1/2 to 3/4 inch clearance from the shroud on the top but is close to touching on the bottom . Is there any way to adjust the shroud so that it has equal distance on top and bottom ? I slackened all 6 shroud bolts to see if it could move down but the holes are round .

I am confused about how to check the oil level . In my operators manual there is a picture of an oil level plug on the left front of the axle . I removed the plug and no oil came out . There are also oil level plugs located on the rear of both gear cases that I removed and oil did come out . Is...

Hello I would like to add a set or two of rear hydraulics for my 3316. I was hoping some of you guys would have some advice here's some pics to start. I have no idea where to start or anything but I'm a quick learner and I've turned a few wrenches. The last pic is the valve I was hoping to use...

found an hydraulic leak where my steering colum bolts to steering unit plz help ive posted pictures

i looking for a compact 33-38hp range i own 15 acres i will be doing mostly fel dragging fire wood snow moving dirt i ran a 245 case ih 9k hrs plowing tilling dragging logs i dont know if the kioti or the mahindra is a good mach i want the mach to have as much fel cap as i can get any help...

How do I add remote hydrolics to my 3316. Didn't get when I bought it, but now it would be handy not to undo hoses everytime I change implements.

repaired.

Torn on decision to buy either the 2010 Kubota L3400 HST with FEL or 2010 Mahindra 3316 HST with FEL. The Mahindra certainly has the better price point but I'm concerned about re-sell value, cost and availability of parts in the future, seems like every other week one tractor dealer or another...

GUYS I GOT A REPOED MAHINDRA 3316 SHUTTLE W/LOADER HERE IF ANYONE IS LOOKING FOR A GOOD DEAL. ONLY HAS 78 HOURS:eek: PM ME FOR INFO