massey ferguson 1635

Anyone have any experience with their MF 1635 Powershuttle hydraulic controller failing? thoughts. Mine has failed twice in 5 years.

Has anyone experianced their hydraulic module failing in there MF tractor. The PowerShutttle version. Mine has failed 2 in the last 5 years, seems like a real high failure rate. thanks

Does anyone know what pressure is supposed to be on outlet of high pressure injector pump. tractor wont start bled all fuel lines have diesel coming out of injector on low side. bled lines to injectors but seem like not much pressure coming out of injector lines when cranking. has new filters...

I am going to sell my 1635 , shuttle trans , open station , 120 hours , 2013 model with loader . I sold the field that I needed it for bush hogging and have not had enough need to keep it but have no idea what its worth , thinking 17,000 . Tractor in Virginia and bought new from AGRI Business...

I have a MF 1635 with about 1200 hours. I was mowing yesterday when the engine slowed down and stopped. I tried to restart it and it turned really hard. So the first thing I did was pull the dip stick . You guessed it, no oil. Now the panic sets in. I let it set over night and changed the...

1635 with only 96 hours bought new 2013. Pull the lever and nothing , rocked back and forth no help . Its possible that it has never been engaged since I have another tractor and cant remember ever using the 4x4. The only thing it has been used for is bush hogging a 10 acre field . Of course now...

So I recently bought 5 acres and a barn. I built a small two bedroom apartment in that my wife and I are using for a weekend place, and a workshop for me, as well as winter storage for my boat. While I was building it the previous owner left his small Kubota tractor with a FEL , not sure of the...

Is there anywhere online to get a replacement tail light lens for my 2013 MF1635? Seems all I can find is the AGCO website that requires you to have a username and password which I don't have. Is there anywhere else?

Looking at getting a set of AG tires for our MF 1635. Are we married to the dealer for the wheels? Or can Unverferth or the like get them? Unless the parts guy entered the number wrong, the price he gave me for the wheels is insane. Below are the tire sizes. AG R1 Front 8-16 6PR R1 HTL AG...

Dealer said change oil at 50 hours and manual says 150 , I just hit 53 , Do I really need a oil change right now ? only used for bush hogging so far

Need a little help. I have a 2013 MF 1635 with hydrostatic transmission. When running implements, mainly a 6' finish mower, I set the rpm's at the 540 mark on the tachometer. When I'm mowing in low speed range, turtle I reckon, the tach needle rides up above the 540 mark quite often. Does this...

Hi all, It's time to do the transmission oil and filter and I thought I'd double-check what I'm doing with my MF 1635 HST. I thought I'd also note a couple of quirks with my tractor -- I can't let my ignition key spring back when starting (I have to turn it back slowly to keep it started...

Hello Everyone, I've been spending way too much time researching on here and other interweb sources, and actually going to dealers. I think I'm down to a Kioiti DK40SE and MF 1635, both comparably priced and both dealers seem to me that they would be good. I'm getting the tractor for much...

Pretty well made up my mind on a Massey either 1635 or 1643 with FEL. Have a good long term dealer < 10 miles from the house with two more dealers one 75 miles north another 75 miles south. My question is in regards to the spec'ed overall width. In reading the MF specs the min. overall width...

I've started to get a bit more serious on a tractor and I'm zeroing in on a 1635 HST including loader. I've been quoted $21,800 CAD. Can anyone else comment on Canadian prices? Should I be trying to wait out until later with better deals in Nov/Dec or after some 2013 model changes get...

I just bought a MF 1635 used with 172 hrs. The 3 pt hitch lift control lever is really stiff. What is the remedy if known?

Hi All, Was wondering if anyone could provide pics of the loader frame on a 1635/1643?? I want to know where it ties in to the tractor on the rear, as well as any mounting points along the way. Looking at building a snow plow frame for next winter, and just want to make sure it is mounted as...

Got a new 1635 with backhoe and loader 5 weeks ago, and all has worked well, until two days ago when I disconnected the backhoe for the first time, with no trouble (with manual in hand, though.) Then followed backhoe manual instructions and connected rear hydraulics pressure line (only hose of...

I just purchased a new massey ferguson 1635 and love the machine itself, but have one question about the hydrostatic transmission. there is three ranges on it, a "snail" speed which is very slow a mid range which is the best overall speed and high range. my question is that when doing loader...

Hi all. I'm looking at buying my first tractor and have it narrowed down to a few. All roughly 35HP. Any suggestions on Deere 3038e vs Bobcat Ct235 vs MF 1635?? My use is mostly as a wooded landowner who will be doing some light woods clearing, mowing trails, moving rocks and wood, road...

Hi all. I'm looking at buying my first tractor and have it narrowed down to a few. All roughly 35HP. Any suggestions on Deere 3038e vs Bobcat Ct235 vs MF 1635?? My use is mostly as a wooded landowner who will be doing some light woods clearing, mowing trails, moving rocks and wood, road...

Hello Everyone, I am a new member to TBN but have been reading the forums for the past few months. I have to thank everyone for the abundance of information in the forums which was so useful in conducting my research on which tractor to buy. My wife and I will be moving to our new home (new...

So, planning on the 50 hour service, in almost 50 hours. :) I will need, an oil filter, oil, Lots of Permatran, a trans filter, which is internal, correct? Have not crawled under yet, so unaware of location. What about the hydraulic steering filter, should be done also? Fuel filter too? Do...

We received our new tractor today, an MF 1635 12x12 Powershuttle and RF 500 rear finish mower. We traded our 1523/MMM, and our beloved MF 35. This tractor is soooo quiet, compared to the 1523, and has a nice deep throaty sound to it also. Love the Powershuttle, and all the choices of deep...

MF 1635 Questions?? Hi, Was at the Local MF dealer getting some parts prices, and had a look at a 1635 Cab model. Does this series have all cast iron construction? (Axles, housings?) Front brakes? The one I sat in was a 12x12 Power shuttle. Did not notice where the lever for the diff lock...

Has anybody price the new Massey Ferguson 1635 with cab?

iv'e been looking at all different brands, and i liked the branson 3510i with loader but it was way to expensive at 19,200 for a 35 hp tractor and i am now looking at the 1635 massey ferguson with loader and i'm thinking that it would be the best buy for the money and what your getting in a 35...