massey ferguson 180

Posting for my neighbor. 1969 MF 180 gas with Allied 600 loader. The unit was working, he shut down and now the loader will only raise very slowly an inch a minute. The 3 pt and power steering work as they should. We checked the oil and hyd filter and all seems OK. Any ideas of where to start...

just finished putting my 180 back together after rebuilding transmission new main hydraulic pump and new auxiliary pump rebuilt multi-power clutch replaced or repaired anything that needed it now the draft control lever will not go past half way forward anybody have any idea what i did wrong

I have a Massey Ferguson 180 that i need to repair or replace the hydraulic pump on i see pumps for sale on the internet from $250 to $700 and repair kits for $200 trying to decide which way to go.Has anyone had any experience with these pumps or with any suppliers or brands of pumps that are...

I have a massey ferguson 180 1966 model that i just bought.It is a project tractor with a few issue.I am getting ready to split it to work on the hydraulics.I attached a tester to the remote hydraulic outlet and got 1500 psi.is that enouth?I attached the the gauge to the outlet on the left side...

Hello, I bought my 180 at an auction in the spring. everything worked but the 3pt. it would lift just very weak. so I used it to cut hay for the summer and tore it apart a week or so ago. I found the filter had been loose on the hydraulic pump and it sucked some crud in. so I bought a new...

Good Day: My injector pump is leaking quite badly now to the point that it does not maintain fuel pressure in the lines and I cannot start the tractor without bleeding it. I am assuming I can rebuild it or get it rebuilt. How difficult is it to rebuild? Can I remove it from the tractor or...

VERY IMPORTANT RIGHT NOW>>> I am working to locate a front end loader. I have found a Case 56L with International Brackets (26" wide, 21.5" at the brackets) and an ALO Quicke Q940, 9401A80000. I cannot tell for sure if these will or will not work on my unit. The Case has a joystick with two...

Can anyone give me some info on a MF 180 and what a fair price would be for one in good condition? Thanks