new holland t2410

It is on a 2010 New Holland T2410. I have a service manual and an operator's manual and have looked everywhere online with no success, so I'm hoping to tap into the knowledge here. The operators manual shows the hydraulic fill plug to also be the dipstick, but I only have the fill plug with no...

PTO lever immoveable. The PTO lever on my 2007 New Holland T2410 became immoveable days after I changed the transraulic oil /filter and then washed the tractor. The problem was water from the washing had turned dust/debris collected on top of the gear boxes into mud/debris which soon dried...

OK so I have an operators manuel with wiring diagram and went to checking voltage. Found cut wires on main 1-2 switch and fixed but still doesnt go. The shuttle switch checks good...inching pedal switch has no voltage and getting no voltage to solenoids on hydraulic cutout valve. i need some...

I've tried to find other posts about this but am not sure if older tractors are the same. ran a Blecavator for 3 days and a bearing went out on it so loaded tractor and hauled to get another impliment. wouldnt move when tried to unload it. Messed with inching cable and got it off trailer but...

My neighbor has a NH T2410 and the three point is missing most of the stabilizer components. He's not very internet literate so I figured I'd help him. All he has is half of that looks like an anti-sway stabilizer that he says was used to hold the lower arms together and a bracket bellow the PTO...

Anyone have any feedback on them, or New Hollands in general? I'm looking at 'super suite' cab shuttle version with 330 hours or so. 2008. Is it tier 3 I am assuming? Anything to look out for? Looks like a nice machine. I'm going to use it to mow, do food plots, remove brush/small trees...

Decided just to use a simple bracket attachment rather than buying the bracket sold for the tractor. Not much to look at but hopefully it'll do. All connections soldered, taped and shrinktubed. Wired into lines made for worklight. Think I'll get one for other side too, may go with a high mount...