vent

Does anybody know where I can find the vent on an LK3054? If I can not find it I am going to drill a small hole in the transmission fill cap. Thanks, lsr

I have a small wall mounted direct vent propane heater, about 5-6 years old, that was working fine every winter until now. I usually have to clean the pilot thermocouple tip, but that's it. But now, the main burner flame is nice and blue close to the entry end, but mostly yellow at the far...

I am in the process of ordering my shop 28x40 and i am torn between getting 12”x12” frame out put in for fans. The intent of the fans is to pull the heat (and fumes) out of the shop during summer. However i do intend to heat the shop during winter. So then i would have to deal with the holes. I...

I am attempting to determine if my eMax 25 has a vent plug. I can find no reference to one in the owner's manual. If there is a vent plug where is it located? Any advice would be helpful and appreciated.

Tractor 2016 XG3025 362 trouble free hours . I saw a little axle oil on the inside of my left front rim , for most of the winter it's been setting . i looked under the front end for a vent tube didn't see none , went and check manual there's none only vent the axle has is the blue threaded cap...

I've never owned a tractor before, and it's been a learning curve. Got this thing less than a year ago, and put about 65 hours on it, mostly mowing with a flail. Yesterday, I had occasion to fire it up to rescue the 4x4 pickup my son managed to get buried in the mud. I didn't mind--figured it...