yanmar 1300d

I have a Yanmar 1300d tractor it just wants to run at full throttle. When I first got it I had to replace the starter switch and bleed the air out of the fuel system. It ran fine I could increase and decrease the speed of the engine. It sat for 7 months and now it just wants to run at full throttle.

I am new to the forum and am greatly impressed by the knowledge and support available here. I purchased a Yanmar 1300D with a Koyker 80 FEL and Yanmar tiller about a month ago. It has been a great machine and I have put about 10 hours on it (has 869 total). I used it over the weekend and all was...

Ther's a guy with a 1300d 4x4, asking 1600$. I was wondering if the front 4x4 system would work on a ym1700. And if any other parts would be interchangeable w/1700? Thanx for any help.

Just got my used 1300d with a Coldwater FEL, box scraper, angle blade and tiller. Cant wait to get started taking care of 5 acres :confused:newhere:.

Just bought yanmar 1300D. I would like to operating manual. The tractor was painted and it covered all markings on the tractor. I don't know what the controls are. Thank you

I hope someone can help me - I am at my wit's end. I cannot get my 1300d to start. I followed all of the instructions for bleeding the system and am getting good fuel flow at the bleed screw at the injection pump. However, I don't believe I am getting high pressure at the injectors. I have...

I am brand new to this forum, and I just bought a used YM 1300D tractor. It came with a nice box scraper and I paid $2700. I need to know a few things, so please help if you can. 1. Where can I get the owners, parts, and service manuals? Preferably a free download 2. who sells used or new...

looking for a new or used sector shaft for yanmar 1300D green hood. I have rebuilt the tractor except for this part. Using one now that I made by hand.

FYI. My right and left front axel gear boxes leaked gear oil from around the "O" ring seal between the upper bell and lower gear box. While I had the upper bell and lower gearbox dissembled I replaced the kingpin bushings and the axel seals as well as installing the correct shim clearance...

Hi all, its the Yanmar noobie again. I'm about to order a manual from Hoye as soon as they get radiator caps back in stock (want to save on shipping). In the mean time can someone help me out on identifing the 9 controls I marked on the attached pic. I know the following, but the rest ...

Hey there. I've had a YM 1300D for several years and now it looks like I've finally got a major problem. I haven't used it in the last couple of years (been using our F16D instead), and it has mostly just sat around. My brother came and got it and used it for a little tilling. Thought it was...

I have few question about selling my Yanmar 1300d. Is E-bay worth doing or is it more hassle than its worth? Local paper a better idea? I bought it for a home I was buying,but the deal went sour,and I have a tractor I dont need now. Any help would be great! Aaron from VT

Hello, My name is Aaron,and I live in VT. As of Friday evening at 6:01 pm I became the proud owner of a Yanmar 1300D. This being my first Tractor I thought it wise to spend a few hours browsing the threads to avoid the dumb newbie questions. The 1300D needs some front end work. According to the...

Hi, I'm in the process of buying a house on 5-acres, which I'll need to mow, plus maintaining a 1/4 mile gravel driveway. I'm looking at a Yanmar 1300D. I like the looks of it, but I'm afraid it might be a little bit "light" for my needs. I think I'd want to pull at least a 5-foot finish...

Hey, I bought a rebuilt Yanmar 1300D a couple months ago. It ran great until the other day when the fuel filter sprang a leak. I fixed that and now it won't start. I filled the tank and primed the fuel line -but it still won't turn over. It tries, but just won't turn over. I'm new to...

I am looking for a reliable source to ship my Yanmar tractor from Minneapolis to Denver. I have enjoyed owning my little tractor and have sold it to its next happy owner. I have passed on the tractorbynet information to the new buyer. If anyone can point me to a good transport company that...

I have a Yanmar Tractor that I have sold and it needs to be shipped from Minneapolis to Denver. Does anyone have a reliable source for shipping? The Yanmar is a small compact tractor with a loader.