yanmar 1610d

I was wondering if anyone had a drawing/detail for how the governor assembly gets installed on the crank. Ours was destroyed when we pulled it apart. The 3T72 crank was split in two. We know how/where the weight goes, but not the rest between it and the pulley. I have included a couple of...

We are rebuilding an engine out of a Y1610D. It is a 3T75U engine with a 3T72 crank. We are looking for a detail/drawing of how the governor is properly assembled on the crank as it was broken when we tore it down. The original crank was snapped in half when we got it. Thank you, Jim

Yanmar 1610D manual

looking for starter part # for 3T75U engine on YM1610D tractor

Hello all, I am seeking a new (second hand) complete front axle for my Yanmar 1610D. I am based in Hampshire, UK. Does anyone know of anywhere that may stock one or has anyone on here got one spare. Warmest,

Hello...I just purchased a 1610D with FEL (Stock I believe). The bucket hydraulic ram seals need to be replaced as the bucket begins to lower when static instead of maintaining its position. The local shop needs the seal replacement kit information...any thoughts? I haven't received my parts /...

Started my yanmar 1610d today and it wants to run wide open. It has set idle for a couple months, ran perfect when last used. The throttle is not stuck, linkage of both hand and foot control works freely. Do I have an injector problem? I've owned the tractor over 5 years and never had a...

Hello, I have made a tooth bar using steel. I had it laser cut for ease and then welded it up on the bucket to ensure it fitted. Nothing difficult and it is rough and ready but it will do the job. Welded some hooks onto the front at the same time. I'm sure you've seen the same design...

Hello, My tractor has developed 2 leaks at the same time, seems a bit unlucky. One is on the front right wheel and I have attached an image. The other is underneath roughly in the middle of the tractor and I have attached an image. Both are at joints. Are they both going to need the seals...

Hi everyone, I'm in the UK so don't have the ability to buy the turf kit from Hoye. I am trying to get a UK company to manufacture some wheels but I can't find the inter axle ratio number anywhere. Does anyone know it for my tractor? Does anyone know where it's stamped on the tractor? Can...

I have a YM1610D. The left pinion shaft thru the brake drum has sheared some splines. I am looking for a replacement. Hoyt Tractor does not have a new or used part. Anyone out there have this part? Or know if any other models of Yanmar tractors will work for a replacement? Thanks. JimAtMoscow

I recently acquired a Yanmar 1610D. I have torn the engine all the way down to the bottom end and have pulled the motor from the frame. I am looking for someone that is knowledgable about these motors that may live close to Memphis, TN to help me rebuild the motor. I discovered that the...

Simple question... how many quarts of oil in yanmar 1610D engine? Gonna use Delo 400 15-40 unless told not to. Time to do some maintance! Thanks in advance, Papa

I have Yanmar 1610D that I am restoring. This guy runs like new but cosmetically needs a little help. I ave purchased most of the minor sheet metal that needs replacing but I can't fenders anywhere. If I can't find a set I do have the option of having them repaired at a local body shop but it...

Does anyone know of a place in virginia that sells refurbished Yanmar tractors for sale?

Hello, I am buying a yanmar 1610d tractor from a private party. What things should I look for and should know about? I am actually going to represent my uncle who will not be there, and I have not bought a tractor before.

I have Yanmar 1610d tractor which I have a problem with. I tryed starting it yesterday but when it started it race the motor so I hade to kill it. But now it wont start. it just turn over and seem to fire a few time but not start running. I put in a new battery and tryed filling with new deisel...

Figured I'd knock out the first post with an introduction. My father and I share tractors between our two properties (he has 2 acres and I have 12.5 acres). We've had a Yanmar 1610D for 5+ years and it has been a great little tractor and we just stumbled on a Ford 1600 with a front end...

Hello all, i have a simple but not an easy question: is there somewhere out someone who compared the John Deere 750/850 with the Yanmars the same size? I ask, because I want to register my Yanmar in Germany, and that is not that easy. I think the JD 750/850 has been also sold in germany. They...

I need to replace the two front knuckle seals on my 1610D. I am trying to decide whether to do it myself or have an experienced mechanic do it. My mechanical skill level would be classified as a beginner. I can handle fluid and filter replacement with no problem but I have never tackled...

what are the goods and bads with this machine? Never owned a tractor but am a mechanical guy.Machines don't scare me.what I'm trying to say is I don't want to know what the inside of a 1610D yanmar looks like.Any info would be appreciated.THANK YOU

Something new happened yesterday, the tractor had been setting for a couple months so I went out to start it and and use it a little. Well, it started just fine but after it warmed up I put it in gear and the right rear wheel would not turn, the left would turn but the right would drag, I...

Does anyone know if it is possible OR a good idea to turn the front wheeels inside out to make the stance wider an this tractor? I alredy have the rear wheels reversed.... :confused:

I have a 1610d and the front diff housing directly under the engine is broken. My question is can the axle tubes be removed from the housing without dis assembling the outer gears (at the wheels). I do not yet have a parts book as i just bought the tractor. Any help would be great. Thanks

Which of these tractors has a better longevity and fewer problems? I'm interested in buying one or the other. In all tractor manufacturing, there is one tractor that outlasts and out performs with less problems than other tractors by the same manufacturer. Just curious what Yanmar tractor...

Does anyone no the correct oil and air filter no. for this model tractor. Also, What type of gear oil does the RS 1300 model tiller use. Is there a service manual available for the model tiller.