I have a Yanmar YM1500. Ordered new brakes and seals to deal with the oil leaking into the brake drums, now I'm ready to tackle the clutch issue.
The clutch doesn't fully disengage. I adjusted the pedal and there is still more adjustment to go, but when I push the clutch in it just keeps...
I'm considering purchasing one of these. Both are in good condition with the ford being slightly more power and the yanmar giving me 4wd. Both have decent loaders on them... I've never had a little tractor this size... I'm thinking the yanmar 4x4 will crawl around in the wet conditions this...
Hi can anyone tell me where the hydraulic relief valve located on a Yanmar YM1500
i think it might be on the drop valve body near the control valve but not sure.
i think mine is bad as i have a weak lift and wont lift over 200lbs and the control valve squeals when lifting implements.
i changed...
hey guys ive been rebuilding a yanmar ym 1500 that i pulled out of my parents field. finished rebuilding the motor and now it will not move. pto works fine and the motor is all new. i need help. thank you in advance
Hi there people
i have a yanmar ym 1500 and it has done a crank and im having no luck hunting one down.
is there anyone who might know where i could get one?
regards
Mat
just wondering if any body can tell me of any other online yanmar parts suppliers ? on monday this week i e mailed hoye about a seal and postage costs to the uk but they never got back to me? the pto oil seal on my ym 1500 starts to leak after around 2 hours of use is that normal for a seal...
afternoon from the sunny uk . well its the start of the cutting season here was just out and cut a few acres with my ym1500 and wessex finishing mower just as i finished and was going to wash the mower down i notice i have a oil leak from the pto shaft seal? can anybody tell me if i can replace...
Does anyone know where to run the three wires from a Yanmar YM1500 generator (part# 124660-77990)? There are (2) yellow and (1) red.
Which two go to the regulator (4 wire part #124160-77710) and where does the other one go?
I bought a 1500 which runs good but had all the wiring from the...