10 Hour Check Over

   / 10 Hour Check Over #1  

ramoffroader

Member
Joined
Jun 13, 2008
Messages
30
Just got 10 hours on my 293 and was prepping it for winter. Retorqued all the loader and frame mounting bolts. Was amazed at how many were loose since I check them when it was delivered new. I had a 2007 233 and never had to replace the driveshaft that alot of people are having problems with. I check loader and frame bolts every season and I think it makes a huge difference. Mounted my Meteor Blower and adjusted and lubed the chain, replaced the gear oil in the gear box and greased. All that is left is to put my quick attach 6 1/2 plow on the front and hook up the hyd. hoses to the rear remotes. So far i have been really impressed with the 293's performance and look to see how it handles this winter. Just a friendly reminder to everyone to check their loader frame bolts before they cause a problem.
 
   / 10 Hour Check Over #2  
The next time you check them you might apply some thread lock on them. Has worked well for me so far.
 

Tractor & Equipment Auctions

2018 JLG 3246ES 32FT. Electric Scissor Lift (A51691)
2018 JLG 3246ES...
Toro Workman Low Profile Spray system 200 (A50322)
Toro Workman Low...
2010 KMC 3376 Peanut Combine (A52748)
2010 KMC 3376...
2022 Wacker Neuson SM100 Mini Skid Steer (A52748)
2022 Wacker Neuson...
John Deere 335 Round Baler (4ftx4ft) (A52748)
John Deere 335...
2023 Stryker GN3614 36ft. 5 Ton T/A Gooseneck Flatbed Equipment Trailer (A51691)
2023 Stryker...
 
Top