coyoteslocos
New member
- Joined
- Jun 26, 2020
- Messages
- 5
- Tractor
- MF 1734e
1734e hydrostatic - oil filter change
On the 1734e hydrostatic there is a 4WD shift lever mechanism right in front of the spin-on hydraulic oil filter. The shift lever attaches to a shaft that goes into the trans, and also has a linkage rod that goes up to floor in the driver's area. The linkage rod is easily removable, but the shaft goes into the trans.
Is there enough room to remove this spin-on filter with that 4WD shift lever mechanism so close to the filter?
On the 1734e hydrostatic there is a 4WD shift lever mechanism right in front of the spin-on hydraulic oil filter. The shift lever attaches to a shaft that goes into the trans, and also has a linkage rod that goes up to floor in the driver's area. The linkage rod is easily removable, but the shaft goes into the trans.
Is there enough room to remove this spin-on filter with that 4WD shift lever mechanism so close to the filter?
Last edited:
