JerryK
Elite Member
- Joined
- Feb 21, 2004
- Messages
- 3,240
- Location
- Vanderbilt, Michigan, USeh?
- Tractor
- Mahindra (2011)5035 HST TLB & (2016)2555 HST Cab & (2017)1526 HST(2018)Cub Cadet Pro Z 154L (1991) Caterpillar E70B
18 vs 850 hp...
- Thread starter JerryK
- Start date
- Views: 960
aczlan
Good Morning
- Joined
- Mar 7, 2008
- Messages
- 16,985
- Tractor
- Kubota L3830GST, B7500HST, BX2660. Formerly: Case 480F LL, David Brown 880UE
To be fair, the hookup between the two favored the steam tractor as the more the Deere pulled, the more weight (on the ground) it removed from its back axle.
Also, pulling a plow all day, the Deere would probbaly out perform the steam tractor by a large margin.
Aaron Z
Also, pulling a plow all day, the Deere would probbaly out perform the steam tractor by a large margin.
Aaron Z
I've seen this a few different times on the forums. The torque that a steam engine puts out is hard to match.
That steamer makes that John Deere look like it is a piece of junk or a big high-tech plow.
I don't know. Them pulling engines are made to go full out for only a short period of time, not for 12 hours like the steamer is made to do. I would think that deere would be blown up at about an hour into the plowing.
That steamer makes that John Deere look like it is a piece of junk or a big high-tech plow.
I don't know. Them pulling engines are made to go full out for only a short period of time, not for 12 hours like the steamer is made to do. I would think that deere would be blown up at about an hour into the plowing.
