1973 mf 135

/ 1973 mf 135 #2  
Remove left bolt as your looking from the front and loosen right bolt. These are carriage bolts in slots on the bottom. If they just spin you might want to wedge a Screwdriver between the Frame and Radiator. See the Massey Vintage forum as a lot of other Posters have asked the same ? including me.
 
Last edited:
/ 1973 mf 135 #3  
You know that the radiator has two bolts sticking out of the bottom of the radiator into the "frame"

Those two bolts and the one support bolt at the top from the engine to the fan shroud.
Other than hoses, that's all that hold it.

Be sure to replace the rubber pads between the radiator and the frame when you re-install it.

Good luck and happy Tractoring!
 

Marketplace Items

2020 INTERNATIONAL LT625 48" SLEEPER (A62613)
2020 INTERNATIONAL...
2012 VOLVO DBL SLEEPER ROAD TRACTOR (A62130)
2012 VOLVO DBL...
Wolverine 72� Skid Steer Screening Bucket (A64047)
Wolverine 72�...
John Deere 4240 w/ Buhler 695 Front End Loader (A64047)
John Deere 4240 w/...
ATS T460 Mini Skid Steer (A64047)
ATS T460 Mini Skid...
Bobcat T66 (A60462)
Bobcat T66 (A60462)
 
Top