1983 MF 210-4 value

[frankf72malibu]

New member here. Helping a buddy clean up his property. He has a MF 210-4 that he does not need due to the large Kubota he has. We are looking to sell it to someone who will get good use out of it. It is a 1983 model with 665 hours showing (my buddy says that is correct). It runs and drives great. All gears at all speeds (L, M, H) work great. The PTO and hydraulics work great as well. It has turf tires on the back with new tubes and solid rubber tires on front. The body is on good shape with only 1 dent by the exhaust. The tractor needs a good washing and will look good. Maybe a re-paint to make it look even better. We drove it around the property today as we took inventory of the implements and moved them around. The tractor ran great and stayed cool, even in the Texas heat. There are around 20 implements that will go along with the tractor as a package. About 7 brush hogs in various conditions, single blade furrow, rotary spreaders, box blades, rototiller, etc. See picture below. Any ideas on a ballpark of what this package would go for? Thanks.
Frank

 

[frankf72malibu]

I can understand this question probably has way too many variables. So how about the value of just the tractor? Thanks!

 

[stan33]

I have the 210-4's bigger brother the 240, 1979.
The 210-4 has a smaller hp....25, but has 4WD.
I can only find one 210-4 on Tractor House (as opposed to around 20, 240's) http://www.tractorhouse.com/listingsdetail/detail.aspx?OHID=9706907 for sale at the moment and that is going for $4257 US in Canada. This may indicate that there aren't many around which could be an issue for parts and that can effect value.
Unless you have a ROPS for it, they are at least $800 in these parts (but there isnt one for the 210 listed here so not sure if there is one available). The one in Canada superficially looks in similar condition but it has an FEL which adds to its value. Not sure if Canadian values differ from Texas or what the hours are on that one. And one listing (from a dealer) probably isn't enough info to arrive at a value.

 

[dusty3030]

Sell the implements separately.
Working 4 or 5 foot rotary cutters are 300 to 500 or a little more if a name brand.
Rotary tiller if a brand and decent shape 500 to a little more if a decent brand.
5 or 6 foot box blade, missing rippers 200 or so for a standard duty, 300 or so with all rippers or could get more if a heavy duty one.
Spreaders, rusted out bottoms and gate worth their weight in scrap, good shape then 250 to 350

So 20 implements at average of 250 a piece could be worth as much or more than tractor if they are decent shape. So I would sell them individually.

 

[frankf72malibu]

Thanks for replying guys. We are still trying to figure out if we do the package deal or not. We were back up at the property today and this little tractor runs great! And I found a few more implements... Fun day as we worked on the Komatsu dozer and fired up a Case 580B backhoe that has been sitting for 7 years. Couple of questions on both so I will post accordingly. Thanks again!