2" receiver attachments

   / 2" receiver attachments #11  
Re: 2\" receiver attachments

6; lenght out on the FEL will be a LOT of added lever weight to lift that 2000 *******. I once could tell that weight with a calculation on the fel point and remember that the life point of mose fels are rated at somthing like center of the vucket...
\
mark M
 
   / 2" receiver attachments #12  
Re: 2\" receiver attachments

Yes it is allot of weight. But when stacking the big sacks you could stack 2 high 3 deep. If you are moving a bight load a long way like a nut sack out from the field. You would tilt the bucket down so you could see the hanging loading fork. Then as you would raise the bucket you would tilt it up. What would happen is the nut sack would come to rest on the bucket. The pole sticking up at around a 25 deg angle. You can rotate it straight up if needed. I had to build it to pick the sacks up high. So the sacks were not always out at 6' out front. I would do that when loading or stacking.
John
 

Tractor & Equipment Auctions

Hay Van FL-95 Bale Squeezer - Hydraulic Bale Grab for Round and Square Hay Bales (A51039)
Hay Van FL-95 Bale...
2012 GROVE TMS900E TRUCK CRANE (A50854)
2012 GROVE TMS900E...
LINDE H80D FORKLIFT (A50854)
LINDE H80D...
2006 Volvo VNL (A51039)
2006 Volvo VNL...
STS MUD MIXING MACHINE (A50854)
STS MUD MIXING...
2009 Lee-Boy 8510HD Conveyer Feed paver (A51039)
2009 Lee-Boy...
 
Top