Oil & Fuel 2003 jinma 224 fluids and filters
Diamondpilot
Super Star Member
- Joined
- Jan 18, 2007
- Messages
- 16,316
- Location
- Daleville, IN
- Tractor
- Jinma 254/284 Ford 861 Powermaster at work
Oil = 15W40 Diesel rated oil
Gear boxes and front axle = 80W90 Gear oil
Hydraulic sump = AW32 Hydraulic oil
Injector pump = Either 30 weigh Motor oil, ISO 100 Compressor oil, or 15W40 Motor oil (yes, the injector pump does have its own sump for lubricating oil and must be changed ever 100 hours max or once a year)
I change my oil ever 50 hours. Injector pump every other oil change. Gear boxes after the first 50 hours then at 250 hours then every 250 hours after that. Hydraulic fluid ever 200 hours of so.
I do not have the same tractor as you so I will let someone else give you the filter numbers.
Chris
Gear boxes and front axle = 80W90 Gear oil
Hydraulic sump = AW32 Hydraulic oil
Injector pump = Either 30 weigh Motor oil, ISO 100 Compressor oil, or 15W40 Motor oil (yes, the injector pump does have its own sump for lubricating oil and must be changed ever 100 hours max or once a year)
I change my oil ever 50 hours. Injector pump every other oil change. Gear boxes after the first 50 hours then at 250 hours then every 250 hours after that. Hydraulic fluid ever 200 hours of so.
I do not have the same tractor as you so I will let someone else give you the filter numbers.
Chris
Bob Rooks
Elite Member
I change my oil filter every 50 hours (sooty little buggers), and the oil by analysis. So far the oil has over 200 hours on it and it's still very good.
