Price Check 2009 Kubota L3400 TLB price check

winburne24 · Jan 21, 2020

I am looking for a price check on a 2009 Kubota L3400 TLB with 3 point hitch. 560Hours. Asking $20250. Tractor is very clean and well cared for. Looks like mainly the FEL was used.

I had a hard time finding anything similar to compare to. Located in Western PA.

Thanks.

old and tired · Jan 21, 2020

What backhoe is on it?

winburne24 · Jan 21, 2020

BH75 with a A 463 FEL

winburne24 · Jan 21, 2020

And it does have the full subframe

winburne24 · Jan 21, 2020

Any one have any input? This is my first time looking into buying a tractor thought maybe there would be some opinions on here????

fried1765 · Jan 22, 2020

winburne24 said:
Any one have any input? This is my first time looking into buying a tractor thought maybe there would be some opinions on here????

The tractor/loader (several) with similar hours is listed on Tractor House for $15,000 or less.
Actual selling price might be something less than $14,000.
That would bring the asking price for the little 7.5' BH to $6,050+, which, being sold as a package, is too much in my opinion.
It is EXTREMELY important that the hoe have a sub frame!
If it does not,.... walk away!

$18,000 might be a fair price for that unit with the BH.
That said: I am not a fan of small tractor mounted BHs, but obviously they are better than no BH at all.

old and tired · Jan 22, 2020

For that combo and "..Tractor is very clean and well cared for.." that's an OK price. Not a deal... and that is if it is a HST. If it's a gear tractor, it's a bit high. Those are pretty low hours and I wouldn't shy away from it. See if he would drop the price a wee bit...

That might have a jerky 3 point hitch which you can use as leverage to lower the price... very slowly raise the 3ph and see if it shakes the tractor!

winburne24 · Jan 24, 2020

I did get them to come down to $19k, throw in a new battery as well as perform the service and delivery. It is a HST and everything checked out pretty good to my limited tractor knowledge. Thanks to all on here for their help. Time to start looking for some attachments.