2220 D fan belt

[davecharles]

I blew a fan/alternator belt today on my 2220D. I'd order one from Hoye but I need it ASAP. My belt is in pieces so it's difficult to measure. Anyone have a Gates part number or one that I can find an interchange. ( it looks like a 3/8 X 33" belt)
Dave

 

[winston1]

Gates 9341, dayco 17341 Don't sue if they don't work.

 

[davecharles]

Thanks Winston

 

[tonyg2160]

Sorry to revive an old thread, but can anyone confirm the cross reference on this belt?

 

[normde2001]

What do you mean by that? Judging by the Hoye Part # I'm guessing it's a 33" belt. Those would be 34" #'s.

 

[normde2001]

What do you mean by that? Judging by the Hoye Part # I'm guessing it's a 33" belt. Those would be 34" #'s.

Disregard that. Fredrick's Parts shows a 38" belt fits a YM2210, no listing for YM2220, so ???????

 

[tonyg2160]

Disregard that. Fredrick's Parts shows a 38" belt fits a YM2210, no listing for YM2220, so ???????

And I'm actually needing the belt for a 2310. I'm basing the relevancy of this thread on the fact that Hoye lists the same HFB-33 ("33in belt?) for both the 2220 and the 2310. Your 34" observation may be correct. I think I saw in another thread somewhere that the cross reference belt that they used was about an inch too long and put them at the end of their adjustment.

 

[tonyg2160]

Sheesh! Why didn't somebody tell me the dern bottom hose has to come off! Oh well... Now ALL the fluids will be fresh. The belt that was on was obviously not the spec belt. 1/4" to 5/16" wide and 34" long. Bought a 3/8x33 at Auto Zone and too tight! May try to find a 3/8 by 34 tomorrow and try.

 

[tonyg2160]

FYI: Gates 6834 works perfectly (on a 2310) . I did have to remove the tightening bolt on the alternator to get enough room to get the belt on, but now it's at the inside end of the adjustment instead of the outside.