2515h tach problem

   / 2515h tach problem #1  

BruceS_55

Bronze Member
Joined
Apr 11, 2023
Messages
53
Tractor
RK25
The tach on my 2515h quit working. I took it in to the dealer and they put dielectric grease on the connector. It was working for a while then started working only intermittently. Now it has totally quit again. The dealer is going to order a new dash panel. Has anyone else had this issue with their TYM/Branson tractor?
 
   / 2515h tach problem #2  
Try wiggle the connectors behind the dash and also check for the single brown wire that comes out of the alternator. That is what gives the RPM signal to the dash, so make sure it's connected too.
 
   / 2515h tach problem #3  
Bruce, your profile says you have an RK25. I don't know if maybe you got a new 2515. The RK is made by TYM, but is very different than a 2515.

@ptsg is a wealth of knowledge on the former Branson models (like the 2515).
 

Tractor & Equipment Auctions

Skidloader Plate (A47809)
Skidloader Plate...
LOCATIONS OF ASSETS SOLD (A45679)
LOCATIONS OF...
90in. Work Bench (A49339)
90in. Work Bench...
Deere 670G (A47307)
Deere 670G (A47307)
2019 Freightliner TMA (A45336)
2019 Freightliner...
2010 Freightliner Sprinter 2500 Cargo Van (A46683)
2010 Freightliner...
 
Top