25D Length and Height

MikePA · Oct 3, 2001

Could one of you that has a 25D plus a loader let me know how long the tractor is? My new 25D will be delivered on Friday and I need to know if I have cleaned enough junk out of my garage.

I know from the brochure the 25D is 106.2" but I can not find any info about the length with the 7308 loader.

Also, what's the height to the top of the ROPS when it's folded? Once againg the brochure indicates 87.8" to top of ROPS but no height to folded ROPS.

Thanks,
Mike

Vermonster · Oct 3, 2001

According to the 7308 manual, the distance from the center of the tractor's front tire and the front edge of the bucket when it's seated level on the floor in front of the tractor is 57". Neither the tractor manual nor the FEL manual gives numbers from which to extrapolate the total length of the tractor/FEL combination.

John_Mc · Oct 3, 2001

I have a 33D (same frame as your 25D). I've never measured the height with the ROPS folded, but I know it's below my head height when sitting on the seat -- I think it's about shoulder level. I'm pretty sure it's below head height when standing on the ground next to it (I'm 5' 8"). The pictures in the NH brochure agree with my memory. So basically, if you can walk in without stooping, you should be OK. Hope this helps for now. I'll take a measurement next time I'm out there.

MikePA · Oct 3, 2001

Thanks for the information about the loader. I think that gives me enough information.

Let's see...

1. The front tires are 25 x 8.50 - 14
2. This means the distance from the centerline of the front wheel to the edge of the tire is 12.5".
3. The front edge of the loader is 57" from the center line of the front wheel.

Therefore, the front edge of the loader is 44.5" (57" - 12.5") from the front of the front tires.

So, 44.5" + 106.2" (tractor length) = 150.7" or 12' 7" total length.