3 cyl deisel engine-Perkins

   / 3 cyl deisel engine-Perkins #1  

Nat

Platinum Member
Joined
Feb 11, 2004
Messages
560
Location
Central NC
I know a lot of you here are always building a small tractor of some type and the power plant is always an issue. I have a small 3 cyl Perkins diesel that would make a great small tractor, repower a garden tractor, wood splitter, home generator ect. If anyone is interested e-mail or PM me. Thanks, Nat
 
   / 3 cyl deisel engine-Perkins #2  
Nat said:
I know a lot of you here are always building a small tractor of some type and the power plant is always an issue. I have a small 3 cyl Perkins diesel that would make a great small tractor, repower a garden tractor, wood splitter, home generator ect. If anyone is interested e-mail or PM me. Thanks, Nat

Is it an "AD3-152"? If so, you've got one of the most fuel efficient and durable diesel engines ever built. And cheap to rebuild when the time comes. A complete "kit" (EVERYTHING except injector pump) is just over $400. That would be the powerplant that made the Massey Ferguson 135 famous. (Roughly 45 gross hp)
 
   / 3 cyl deisel engine-Perkins
  • Thread Starter
#3  
This is a 103-09 Perkins. It is a small 1 litre engine, 23 HP.
The 152 Perkins came standard in a lot if different equipment plus in AC, Massey, Oliver, and Bobcat to name just a few. Thanks, Nat
 
   / 3 cyl deisel engine-Perkins #4  
Does it have radiator, fuel tank and stuff or is it just the engine? What do you want for it if I pick it up?
Thanks
 
   / 3 cyl deisel engine-Perkins
  • Thread Starter
#5  
It is complete with radiator, fuel tank,starter,altenator. everything. It will start up sitting as it is and you can hear it run, then I'll load it on your truck for 700.00. I have the hour meter so you can see the actual hours, if I Remember it's 1700, maybe 1900, can't remember. It has the bell housing and I have the plate that hooked the flywheel to the generator shaft so that hooking it back to something else should be simple. All it needs is a home. Thanks, Nat Angell
 
   / 3 cyl deisel engine-Perkins #6  
hi Nat, how heavy is this unit, will it fit on a 4 x 3 pallet
 
   / 3 cyl deisel engine-Perkins
  • Thread Starter
#7  
The engine with the fuel tank, bellhousing, radiator, and base frame is probably 450 lbs, and about 2 x 5 foot. It could go on a 3 x 4 pallet if the baseframe was shortened or removed. It is pretty simple to do with the act torch. HTH, Nat
 

Tractor & Equipment Auctions

Land Honor 84" 3 pt Disk (A50514)
Land Honor 84" 3...
2012 MACK CHU613 DAY CAB FLAT TOP ROAD TRACTOR (A51243)
2012 MACK CHU613...
SAKAI SV510 SMOOTH DRUM ROLLER (A51242)
SAKAI SV510 SMOOTH...
2018 CHEVROLET 1500 SINGLE CAB TRUCK (A51406)
2018 CHEVROLET...
Hyster H225E (A47384)
Hyster H225E (A47384)
2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
 
Top