gimli1d
New member
Greetings;
Have a 40 industrial that the 3 point doesnt work. Dont believe it has ever been used, as the unit came with a backhoe attachment. I removed the plug from the transfer tube and barely have a trickle of oil. the quadrant controls were all frozen from lack of use. pulled the response control cover and all the controls seem to move freely. The oil has been changed. preparing to pull the lift cover to check out the pump. Have removed the transfer tube and will remove the roller before i lift the top. I have a service manual , but are there any gotchas i need to know about? I think I have to pull the PTO shaft b4 i can remove the pump. Thanks in advance
Have a 40 industrial that the 3 point doesnt work. Dont believe it has ever been used, as the unit came with a backhoe attachment. I removed the plug from the transfer tube and barely have a trickle of oil. the quadrant controls were all frozen from lack of use. pulled the response control cover and all the controls seem to move freely. The oil has been changed. preparing to pull the lift cover to check out the pump. Have removed the transfer tube and will remove the roller before i lift the top. I have a service manual , but are there any gotchas i need to know about? I think I have to pull the PTO shaft b4 i can remove the pump. Thanks in advance