3 point lift lever is sticky YM1510D

[yellowdog5]

When I lower or lift the 3 point hitch on my tractor there is a sticky spot, it does not operate smoothly, it stops and I have to jiggle the lever a little or force it through the tight spot. Does anyone know what's wrong?

 

[winston1]

Have you examined all the external linkage for possible tight spots?

 

[CoyPatton]

In addition to a bent/binding linkage, look for wear points at connections on those linkages. A slightly out of round hole or a grooved pin can cause a snag during movement.
These are much simpler to fix than internal hydraulic issues so check closely. A bushing may be all the fix you need or straighten a linkage.

 

[yellowdog5]

Thanks Coy Patton I will check it out this evening.

 

[yellowdog5]

winston1 yes I did but I dont think I understood what to look for, I'll check it out tonight.

 

[shovelrider]

I think, in other words. Look for any wear spots on the linkage itself. Such as wore spots on them such as paint being removed as it rubs together etc..

 

[yellowdog5]

The linkage was the problem, I oiled it well and it's running smoothly now, going to order some new parts.