3 PT DRAWBAR "HANDI HITCH"

[rico304]

""3 PT DRAWBAR "HANDI HITCH" TELESCOPING BOOM POLE COMBO""

Anyone heard of these? I saw it on ebay and it really looks like a great idea. It has several other attachments they sell that attach to it too. Shorter boom, tool carrier and I believe there was a couple more. Here is a link to the ebay auction................


Let me know what you think? Any down side you might see.

3 PT DRAWBAR "HANDI HITCH" TELESCOPING BOOM POLE COMBO - (eBay item 130160375491 end time Nov-03-07 14:34:06 PDT)

 

[tessiers]

I have a hitch similar to the handi hitch and I love it.

Mine has a 2" reese style reciever which I have multiple trailer ball sizes for as well as a clevis hitch and a hitch to move hay wagons.

The hitch probably clocks more tractor time than any other attachment maybee more than all others combined!!!

I plan to build a boom pole this winter once outside projects get frozen over till spring.

 

[RalphVa]

I had a drawbar hitch made. Attached is a picture.

It's basically a drawbar between the 3ph arms that you buy at TSC. I just had some heavy metal straps (also available at TSC) bent to bolt to the sides of the drawbar and formed to make a point to attach the top "leg" of the 3ph.

By attaching another top "leg" on the same pin or an adjacent pin (I had two sets of holes done for the top attachment, because the other held the leg that goes back to the soil ripper that I attach to the drawbar), you can get the same effect as that boom pole thing, but without the stiffness, of course.

Ralph

 

[Tororider]

Ralphva, that looks pretty nice. You said you had it made for you? How much did the whole thing run you? It looks pretty slick and I like the green paint to match.

Rico304, I think it looks like a really cool attachment that would definitely get a lot of use around our place, it just seems a little pricey, maybe that is just me being cheap. But it does look very cool. If you end up getting it let us know how it works and post some pictures of what you end up using it for.

 

[rico304]

I think this is the same one. You take the boom pole off and add any of the following attachments. I added links to the various attachments. Looks like it would have many uses that I would like. (But then again, I think I need everything. hahahaha)


TOOL CADDY FOR TRACTOR FITS OUR HANDI HITCH - (eBay item 7524158728 end time Nov-02-07 17:07:19 PDT)

TRACTOR FORKS FOR OUR HANDI HITCH, 800 POUND CAPACITY - (eBay item 3874741338 end time Nov-01-07 17:49:49 PDT)

Handi Hitch Carry-All combo - (eBay item 300109917152 end time Nov-05-07 07:17:36 PST)

HANDI HITCH SHORT BOOM POLE COMBO - (eBay item 7578303072 end time Oct-25-07 11:16:13 PDT)

GOOSENECK ADAPTER FOR TRACTOR FITS OUR HANDI HITCH - (eBay item 7578293598 end time Oct-25-07 10:48:38 PDT)

 

[bigdad]

Ralph,

I would really like to see how your soil ripper attaches to that drawbar or even better yet.....an action photo. That's a great idea!

Big Dad

I had a drawbar hitch made. Attached is a picture.

It's basically a drawbar between the 3ph arms that you buy at TSC. I just had some heavy metal straps (also available at TSC) bent to bolt to the sides of the drawbar and formed to make a point to attach the top "leg" of the 3ph.

By attaching another top "leg" on the same pin or an adjacent pin (I had two sets of holes done for the top attachment, because the other held the leg that goes back to the soil ripper that I attach to the drawbar), you can get the same effect as that boom pole thing, but without the stiffness, of course.

Ralph

 

[WayneB]

You can also go to their website
Redlandhill in Ellerbe, NC

I bought the handi hitch for my Kubota and it has worked out fine for moving things around, like my boat.

CUSTOM 3 POINT HITCH CONVERSIONS,PARTS, ACCESSORIES AND FABRICATION