3520 MFWD speed sensor photo needed...please...

[compact]

Well, I ripped the terminals from my MFWD speed sensor connector getting firewood today. The terminals, sensor, and connector seem OK BUT...

The wire colors in the repair manual match the ones on the tractor harness (red, orange, black) but the sensor has red/wht, blk,wht, grn.wht wires which don't match the manual or the tractor. I have no way of telling which wire goes into which hole on the connector.

If I had a picture of the wires going from the sensor into the connector (they are a little exposed on the way in) I think it's repairable as they appeared to pull out but nothing seems broken.

Thanks in advance, you will have saved me from explaining to a dealer why I'm crawling around under his tractors with a camera.

 

[chickenman]

i'm holding one right now

I think I paid about $65 3 years ago

lva11184

 

[chickenman]

Trans Oil will come out the hole when you pull it, I was able to swap it losing a couple spoon fulls of oil.

So be sure you have something to plug the opening, fast.

 

[compact]

Thank you Chickenman! I put the terminals back into the housing per your photo and it still works. I Didn't need to remove the sensor as it pulled the terminals out of the connector instead of breaking the wires from the sensor, lucky I guess.

 

[chickenman]

Glad to be of help.