JUST BEEN PLAYING AROUND WITH THE NO START PROBLEM ON MY MAHINDRA 3535. WHEN IT'S WARM IT SEEMS TO START MORE OFTEN. WENT UNDERNEAT AND DROVE A THIN BLADE SCREW DRIVER TWX THE SWITCH AND THE GEAR SHIFTER AND IT STARTED RIGHT UP. I HAD TO PLAY WITH THE SHIFTER TO GET IT JUST RIGHT BUT IT STARTED. THEN JUST THIS WEEK WITH THE COLD TEMPS AND NOT RUNNING IT ALL WEEK IT WOULD NOT START. WENT UNDER TRACTOR AGAIN ( NOW I'm SOUNDING LIKE FOREST GUMP), DROVE THE SCEW DRIVER TWX THE SWITCH AND THE SHIFTER. IT STARTED BUT I HAD TO PLAY WITH THE SHIFTER. THAT WASN'T TO MY SATISFACTION SO, BACK UNDER I WENT AGAIN (FOREST). THIS TIME I DROVE THE SCREW DRIVER TWX THE BALL AND SWITCH, SPRAYED IT WITH BP BLASTER, JAMED SCREWDRIVER IN AND OUT AND SPRAYED SOMEMORE. LOW AND BEHOLD, TURNED THE KEY TO START AND IT STARTED. SHUT IT OFF, PUT IT IN FORWARD THEN BACK TO NUETRAL AND IT STARTED. I DIDN'T HAVE TO SEARCH FOR A SWEET SPOT ANYMORE. WHERE EVER I PUT IT IN THE NUETRAL POSITION IT STARTED. HERE'S HOPING THAT THIS KEEPS WORKING AND THIS POST HELPS SOMEONE ELSE. THIS IS THE FIRST TIME I EVER GOT ON ANY SIGHT. I'm 74 YEARS OLD , STRUGGLING WITH COMPUTERS. JUST DOING THE TECH THING BY TRIAL AND ERROR.
