3616 Cab model - First look
- Thread starter DavesTractor
- Start date
- Views: 9443
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,643
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
I would have to say that in Mahindra's smaller tractors, the seats are not one of their stronger traits. 
When I bought my 3215, I had the dealer install a suspension seat for a 7520. :thumbsup: The stock spring seat just was not going to cut it for me.
When I bought my 3215, I had the dealer install a suspension seat for a 7520. :thumbsup: The stock spring seat just was not going to cut it for me.Porkie
Bronze Member
We well fed Americans probably weigh more than three typical Indians or Asians.
I bottomed out the so called suspension seats on their larger tractors and I'm just "big boned," as my Momma used to say!! 6ft-5in and 350 lbs of solid, corn fed, table muscle, requires a good seat!
Sam
I bottomed out the so called suspension seats on their larger tractors and I'm just "big boned," as my Momma used to say!! 6ft-5in and 350 lbs of solid, corn fed, table muscle, requires a good seat!
Sam
rut3556
Bronze Member
>>6ft-5in and 350 lbs of solid, corn fed, table muscle<<
Ah, a true Amateur Radio Operator!
73,
RUT (K1HS)
Ah, a true Amateur Radio Operator!
73,
RUT (K1HS)
Rayrla
Silver Member
Questions for Dave. Will the 3616 cab or 4510 cab fit under an 8 foot high garage door? I have not been able to find any info on the height of these cab models on Mahindra's web site. Also can you briefly compare the differences in the 3616 and 4510 cab tractors, other than hp and weight? Thanks for participating with this forum.
OP
DavesTractor
Elite Member
The 3616 is about 85" tall. I just shipped my 4510 Cab, so I can't measure it. It is certainly taller, but I think it will go under a 8' door. As far as comparing, they are completely different. The 3616 is a Mitsubishi made tractor, medium frame compact (by my definition anyway). The 4510 is a Koren built tractor and what I would call a heavy frame compact. Different animals. Then throw in the new 5010 Cab, and you have yet another choice. In Mahindra-speak, 16 series are Mitsu, 10 series are Korean, most everything else is built in Mahindra's own factories. I guess I could create a word picture and say that a 3616 is a 3/4 ton pickup and a 4510 is a one ton pickup if that makes any sense. I prefer the 3616 if you don't need more than 1650 Lbs front loader capacity.
Rayrla
Silver Member
Dave, thanks for the info. I thought the 3616 would be the most appropriate for my needs. I am considering replacing my Ford 1920, a 33HP tractor, which has taken care of 90% of my needs. Where the 1920 lacks besides a cab is loader work. I understand that the loader and hydraulics on the 3616 are rated slightly higher than the 1920. Thanks, again.