3644 coming in

Maka · Oct 28, 2006

Hello All,

I have two truck loads coming in and am anxiously awaiting the 3644 as I have them set up with the 3rd function on the loader control joystick. I will be putting a 4in1 bucket on it with R4's. I have dozer blades as well and think that the combo of the 3644 w/3rd function will be a very nice unit.

I will take pictures and post when I get them on Monday.

Maka

Jae · Oct 29, 2006

Maka said:
Hello All,

I have two truck loads coming in and am anxiously awaiting the 3644 as I have them set up with the 3rd function on the loader control joystick. I will be putting a 4in1 bucket on it with R4's. I have dozer blades as well and think that the combo of the 3644 w/3rd function will be a very nice unit.

I will take pictures and post when I get them on Monday.

Maka

Ahh man, now you are just teasing me.. you are going to make me think I bought the wrong Tractor

by the way.. what does all that mean?

3rd function on the loader and 4 in 1 bucket?

BRUSHTAMERS · Oct 31, 2006

Hope your'e using a more robust setup on the joystick than AGBAG put on. It's just about toast after only a litttle over 300 hrs. The joystick pic is the blue topped lever. Pops apart constantly,leaving me with a bad feeling for that control unit. No problem with the valving so far, but managed to bend the bucket on a pretty simple sideways haul within the first 5 hrs on a brushing job, For a bucket that cost over $3000 , I'd hoped it be a little tougher.