3PH Snowblower Help

[JJT]

CamshaftLF - just went out in the cold to measure the damned thing, 51" from the 3pt pins to the end of the blower and the pins are 8 inches from the tires, so I was wrong, not 4 feet, but 1" shy of 5 feet.

 

[CamshaftLF]

JJT- I just went out in my warm garage and measured my blower, from the pins to the back of the blower is only 19 3/4",I don't have my tractor here or I would hook up the blower but the tractors at my son's. I'll have to take some pic's of it when I get it back home./w3tcompact/icons/cool.gif

Camshaft in Pa.

 

[emery]

I just bought a used Woods 60" unit and the first modification I made to the tractor was to add lexan 'window' out the back between the ROPS. I figure this will stop some snow from blowing into my face as I try to watch where I'm going.
I paid $700 for my unit that was only a couple of years old, but badly damaged from trying to throw a log.
My wheels are 53" wide and I figure the 60" will clear path wide enough around corners.