3pt and Front End Loader Out

[ben9019]

My FEL and 3pt hitch hydraulic stopped working recently. Cleaned filter. Still won't lift. Ideas for what to check? Have check leaks and made sure pto fully engaged,etc? Tractor is Jinma 254.

Thanks

 

[shaley]

Check the quick disconnects where the loader plugs in. The power beyond circuit may be disconnected.

 

[Ronbo]

I agree. That is what was wrong with mine. It looked connected, but it wasn't.

Ron

 

[Ranch_Hand_Supp]

My FEL and 3pt hitch hydraulic stopped working recently. Cleaned filter. Still won't lift. Ideas for what to check? Have check leaks and made sure pto fully engaged,etc? Tractor is Jinma 254.

Thanks

Checking you hyd quick connects are no doubt the first thing to check if you are still running the factory connectors.

We have had some of the 2006 models have the plastic pressure relief valve break in the filter head [if yours has the external spin on hyd filter] and restrict oil going to the suction side of the pump.


Ronald
Ranch Hand Supply

 

[rback33]

Checking you hyd quick connects are no doubt the first thing to check if you are still running the factory connectors.

We have had some of the 2006 models have the plastic pressure relief valve break in the filter head [if yours has the external spin on hyd filter] and restrict oil going to the suction side of the pump.


Ronald
Ranch Hand Supply

I have to agree with Ronald here that it sounds like you have a relief issue if you lost ALL hydraulics.

 

[Gilford]

I had this issue on my MF 1533 after I changed the hydraulic fluid and filter. It turns out the pump was air locked, and opening the bleed valve on the pump solved the problem. The manual never mentioned the bleed valve, so it took me a while to figure it out.