wango tango
Silver Member
I have a Farmall 75a. Think it could handle a 6 row NT planter? Like a JD 7000. It pulls my 6’ land pride 3p606nt fine. It has 9 rows.
I have 60a to plant.
I have 60a to plant.
4 or 6 row no-till planter hp?
- Thread starter wango tango
- Start date
- Views: 2654
Hay Dude
Super Star Member
- Joined
- Aug 28, 2012
- Messages
- 19,063
- Location
- A Hay Field along the PA/DE border
- Tractor
- Challenger MT655E, Massey Ferguson 7495, Challenger MT535B, Krone 4x4 XC baler, (2) Kubota ZD331’s, 2020 Ram 5500 Cummins 4x4, IH 7500 4x4 dump truck, Kaufman 35’ tandem 19 ton trailer, Deere CX-15, Pottinger Hay mowers
Yes, but terrain conditions are going to be a factor, right? What are they like?
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,479
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
We have pulled a 4 row 7200 with my Branson 8050.
She never even breathed hard doing so. However, we plant at a very low speed because of all the rocks here.
About 2-3 mph. We find it much more productive to go slow and keep going rather then go faster and
spend a bunch of time doing repairs. Much nicer to sit in the AC then get out and get greasy and dirty fixing broken chains
and coulter bearings. Get enough exercise getting out to fill the seed hoppers and dry fertilizer hoppers.
It shouldn't pull any harder then your 9 row grain drill.
She never even breathed hard doing so. However, we plant at a very low speed because of all the rocks here.
About 2-3 mph. We find it much more productive to go slow and keep going rather then go faster and
spend a bunch of time doing repairs. Much nicer to sit in the AC then get out and get greasy and dirty fixing broken chains
and coulter bearings. Get enough exercise getting out to fill the seed hoppers and dry fertilizer hoppers.
It shouldn't pull any harder then your 9 row grain drill.
