Tractorganic
Silver Member
- Joined
- Nov 22, 2003
- Messages
- 125
- Tractor
- NH/TC40D SS; BCS 850, Brush Mower, Sulky, 'Tiller, Chipper, Snow Blower; JD X570-48-A
I'm having knee trouble and this latest bout is a direct result of climbing up and down off TC40D tractor and backhoe. Did you know that a mere 20 cycles to and from pickup site and placement site (3" crush stone for bank stabilization not placeable with FEL bucket) results in 160 mount/dismounts from tractor and hoe?
Anyway stepping up onto the tractor with the factory steps is a stretch to get up to the lower step, and then to the upper. Has anyone heard of a replacement step with a lower reaching bottom rung and an additional rung near top or a mod' of the factory steps?
I won't even begin to approach problems with the backhoe's mini step yet.
Anyway stepping up onto the tractor with the factory steps is a stretch to get up to the lower step, and then to the upper. Has anyone heard of a replacement step with a lower reaching bottom rung and an additional rung near top or a mod' of the factory steps?
I won't even begin to approach problems with the backhoe's mini step yet.
