Price Check 4110 price check

[Marko]

I paid 13,900 for my 4110 , 410 loader , loader rear R4's , NO MMM , this included the bucket level indicator. I added 1 yr later the block heater and trans heater. Installed them myself and cost for the parts was about $150. Did not get the backhoe , wish I had as now I need one

Hope this helps

Marko

 

[al3]

Hey Marko
How'd that transmission heater work out this winter? Did you notice a big difference on cold start ups with and without? Thanks for your previous posts on the installation and parts numbers by the way. Guess you now have two genuine JD magnets on your frige door.....
I plan to install one in my 4110 when I change fluids at 50 hrs. Sounds like a must have in cold weather.

 

[2nstonge]

al3,

I have the block heater on my 4110 and while I didn't use it all the time we had a couple of nasty cold spells - 15-20 below zero when I did have it plugged in. The difference in starting is night and day. It never didn't start but with the heater it's almost instantaneous and the start-up smoking is over in just a few seconds.

-Norm

 

[Marko]

al3 ,

That is the exact time when I did my trans heater , at the 50hrs trans service. Works great , small amount of investment for that extra piece of mind during those cold months. This year was COLD !! I did notice after the trans fluid change that the hydro performance was much better. That is response from my input for loader operations.

Marko