4110 remote hydraulics
- Thread starter mahi
- Start date
- Views: 1487
markie61
Veteran Member
- Joined
- Mar 31, 2001
- Messages
- 1,362
- Location
- Northern Virginia
- Tractor
- 2019 Rural King RK55HC with Loader & Backhoe; 2001 New Holland TC40D with Loader
I have the TSC logsplitter. After making the connections, I bungee cord the control lever in the "open" position on the tractor, then I can you the control on the logsplitter. If you are using the loader connection, you will have to do the same with the joystick.
Mark
Mark
NGADude
New member
Hi. Can either of you tell me where you got the male hydraulic hookup that goes from the 1/2 hydr hose into the 4110 female quick couplers? I bought the TSC log splitter but cannot find the male hookups that will fit my 2003 4110 females. The 7/8 in TSC hookups were just slightly too big. Thanks for any help.
kneedeep
Veteran Member
Re: Need male hydraulic hookup for 2003 Mahindra 4110
I did what I should have done at the start; took off the female coupler and took it to TSC. If you buy the 1/2 hydr hose from them, this male hookup will fit a 2003 Mahindra 4110: Pioneer VP8010-4P-DC 1/2 NPTH.
I did what I should have done at the start; took off the female coupler and took it to TSC. If you buy the 1/2 hydr hose from them, this male hookup will fit a 2003 Mahindra 4110: Pioneer VP8010-4P-DC 1/2 NPTH.
